Recent content by dubnutty

Does anyone have a picture of how the tail lamp bracket mounted to the rear? Mine has a home made bracket for lamp and plate. I'm also doing a left and right tail lamp install and see the brackets for sale but where do they mount? Thanks

I have a question for those of you who have a station wagon. I have a '29 that does not have rear doors. Sometime during it's life those were removed and a wood panel was placed in the opening. I need some info on the hinge that the doors would have swung on. Was it similar to the front door? I...

If your not going to use them, I sure could. Scrap yard!!:eek:

Joe K. As I am an owner of a ‘29 Woody, I don’t think this would look good in my garage. But my car is not streetable yet, maybe a suitable candidate to fill the void till then. 😂

Thanks everyone for the help in which direction to go. I’ll check out all three places. I looked at that wheel trueing article and as much as I would like to try I don’t think I want chance it making them worse.

Does anyone know of a place or person that does wheel repairs? I just picked up a set of 19 for my ‘29 project. A couple have a bit of run out. I didn’t expect perfection but I’d like to get these close before I powder coat them. Thanks for any advice.

I figured it out! the nut that I was seeing is screwed into the four bolt cover on the box. I dug out the seal and started cleaning the gunk out. Seal and other parts will get ordered this week.

Thank you all for your help. I might have time this weekend to do more work on car. I need to order a horn rod and light switch any way so the seal will be added. I think I'll try the John Deer grease because I looked around for the Pennrite but no luck finding local. Once again THANKS for the help.

Hey 1931, use the Pennrite instead of the 600 weight?

I wish the picture would load because there seems to be a nut screwed on to something inside the four bolt cover. Do I just slip the felt seal over the rod and install the spring & spider?

Picture won’t load from phone. I’ll try from a computer.

I’ve got a leak coming out of the base of my 7 tooth steering box. The cars a ‘29 Wagon. I removed the light rod and determined that the seal is bad. Now how do I fix this? I see a seal and a seal & tube from the venders. Which one should I use? Also will I have to remove the box for this...

Nothing beats a lovely Boddingtons Bitter hand pulled from the tap!!!!!! OH, the creamy delight!!!! But seriously, all I heard was BEER!

This is strange but I was going to ask about the replaceable GAV seat in my '29 carb, too. I've inspected that there is a seat down in the bottom and have tried to remove. Is there a procedure for removing this and retapping the threads? I know I will have to drill out the seat if need be but...

I'd like to hear more about these Hoover Dam Woodies! Here's a photo of my car in it's present state.