Recent content by dennis lumbert

I think this is what your looking for.

Very Nice A,thanks for sharing.

If I read your post right you are are referring to the free play between the push rod and the arm that pushes down on the push rod when the the brake lever is moved forward of engaging the rod,that play is normal,as long as the lever is 15 degress forward of vertical when the brake wedge is engaged.

As a younger man I wondered why older folks always talked about their medical conditions and ailments, now at 74 I totally get it !

What I meant was balanced OK followed by the initials of the machinist

"Balok" balanced , followed by initials of machinist is my best guest.

I ordered two sets from Oreillys on the 12 and they cancelled the order on the 13th due to out of stock.

Well,after I tried stuffing them in there I soon realized it wasn't going to work,I guess its true that necessity is the mother of invention,something my Dad was very talented at. Thanks for the kind words ronn!

Your welcome!

I used an electric kitchen knife to cut the foam and trimmed the excess off flush with the top of the spring assembly before putting on the burlap.

The foam I used was thicker than the tallest spring, what I did was cut the foam into a hexagon shape cylinder that was as large as the biggest part of the spring, and I compressed the foam and rolled it on a table with saran wrap to hold it into a tight roll, then I inserted the foam into the...

I had that chain mesh on my tudor front seats, but it was falling apart. I removed it and installed two layers of burlap and then top that with a piece of automotive carpet and hog ringed it around the edge . I also installed two new bottom seats springs from Snyder's and when I put it together...

Welcome from Arkansas

I’ve had a California car cover for my 30 tudor for about nine years, it’s made for indoor use only and fits very well. At the time I ordered it, I did not have side mirrors and a few years later I added the side mirrors, so I called them to see if they had pockets to sew into the cover for the...

Thanks for sharing, have fun!