Recent content by daveymc29

Anyone have any good ones close to SF Bay area? I tried doing a search and came up dry. Dave Mc Arthur, The not so "Ace" mechanic

Dave Mc Eachern makes a great set of gears for our A's and T's. Bronze is quieter that the aluminum ones, I'm told. Want to build a nice Burtz with a set of Mc Eacherns gears. I may even want to go with and overhead like the Miller if my horse can run a few seconds faster, but poor devel he is...

Turned the fuel off under the hood of my 31 coupe, after yesterdays drive. this morning I went out, closed the hood and latched it, got in the drivers seat and tried to start it to go have my Sunday Morning Coffee at Pete's. So it didn't start. Guess what I did next, looked at my Lincoln, then...

I would like to find a source for the chicken wire and padding that is used for installing a new roof on my 31 Coupe. I have the fabric. Live in Danville, CA. Any dealers close by?

Does anyone make the AA bell housing? They seem in short supply near me. Dave Mc Arthur

Also check the toe in. If that is excessive, or non existant you will surely get the death wobble. I set mine at about 3/16" or less and it seems to track great. I also put on radial 600 X16 tires and tubes and the car doesn't want to follow small grooves in the road like it used to do.

Synchro I'm in Danville, CA and in the roster. If you would like to come by for a bit I have indoor parking and a vacant king sized bed. Dave Mc Arthur

I received an email this morning that the meet was cancelled due to the fires. All fees will be refunded. Anyone else receive this? Came from mafca?

I recieved an email suposedly from mafca that due to the wildfire the meet has been cancelled. (June 18 from Robert L. Bullard, 2024 mafca President. Anyone else receive that bit of info? It had the mafca logo and all.

A final note. The morning of the event I went out to my car to get it running while my bride was getting the final bits into our cases. Hit the starter and nada, tried the horn and lights, nothing. Transferred my trash to the modern machine and drove that to the "opener." It rained on us a tad...

I cut the heads off of four 1 1/2 inch long bolts and rounded the area I had cut, then I made my screwdriver slots. Took probably 10/15 minutes to make and the pan is easily slipped into place with perfect location. Tighten a few bolts close to each of your new "tools" and then put them in a...

I got you covered on the team as long as it is 3 or less. Also can ride a horse with sirsingle and halter. Found that shooting rabbits while hoseback will get you a free walk home. Dave the outdoors man.

So I get ready to start the car. Crank it a bit and it seems to be spinning over fine, but it may be a bit flooded as it doesn't start. Then from up in the front I hear a "thunk" sound and there is no more spinning of the starter and nothing electrical works. There is a slight buzzing sound from...

I have a couple of old sockets that instead of fitting some nut or bolt have a blade for large slotted plugs or screws. Maybe a tool vender can find one for you.

Go to the inside of the drum and drill the stud, start 1/8" hole and work up.