Recent content by Billybob57

I'm interested in an adjustable drag link. What is their contact information?

I'm in need of an adjustable drag link for a 1930 Tudor as well as a rebuilt North East round speedometer.

Seriously? Insinuating someone has a drinking problem is simply wrong!

https://youtu.be/gU_G1AAkefQ

I'm just saying name calling ( he called Paul a drunk) because someone critiqued your product is pretty childish. Buisness owners should have thicker skin than that! Folks need to grow up and act like adults! And bitching? You wrote a book!

It baffles me that a company that is in the process of promoting a new product would be so critical of concerns identified. Personally it makes me think your trying to hide something. Welcome to the buisness world!

This video really helped me. https://youtu.be/lcJ5LUbmro0

I'm confused as to the proper way to adjust the brakes. Below are the two methods I've found; *Paul Shimm and Diablo DVD version- Adjust all 4 wheel brake adjusters until there is a slight drag. Then back off 2 to 3 clicks. Then install the board on the brake pedal at the 1st notch. Go...

I'm having problems installing the emergency brake lever in the toggle lever. I can't get the lever to pinch onto the toggle lever enough for the pinch bolt to thread in. Any suggestions?

Look forward to receiving my deluxe kit. I've heard good things.

Ted is good to work with. It's the New Zealand post that's the problem

On the bench it is much easier to access the springs. I've read lots of comments on how hard it is to install the springs with the backing plates on the car.

I'm in the process of rebuilding my 1930 Model A Tudor brakes. I'm assembling everything on the bench. My question is, can I assemble the entire backing plate assembly, including the emergency brake actuator shaft and spring, and still be able to install it on the car? I've read some say you...

Thanks. I'll try the spoons!

I'm in the process of installing the new style cast iron front radius ball holder. . *What's the secret to getting the rubber ball over the steel radius ball? *With the new cast iron unit, which doesn't use the springs, the nuts are well above the cotter pin holes when tight. Should I just...