Recent content by art

For Sale 1965 Mustang Convertible, Black w/Red Pony interior. Ford A/C. 289/225 HP Eng. "A". C-4 Automatic, 73000 Mi. Power steering, Power top. Not just a driver. Much better. E-Mail- Mitzart@AOL.COM

Where can find info on this item? '65 Mustang 289 w/PS & AC. None of the vendors show the timing pointer for '65. They start @ 1969 E-bay shows one they claim is correct, but it is not

I have a 65 Mustang w/289 engine, alt, a/c and an Eaton power steering pump All new belts & hoses, fresh type F fluid. When first starting, I hear a high level screech which disappears after 10-15 seconds. Belt is as tight as I can get it. Any suggestions?:mad::mad::mad:

Bob: If the cylinders were on the wrong side, that would mean that the hose connection would be toward the front of the car. No, the brake cylinders are on the correct sides. WC40951 on the left side WC40952 on the right side

My problem is fitting the tubing on to the bleeder without a kink, not opening the bleeder Art

Its factory 4v. Cast iron Art

Thanks for the info: I looked in the local parts stores here but found nothing Art

On my '65 Mustang, the front bleed screws are so close to the spindle casting that it is difficult to get the tubing to make such a sharp 90 and slip on to the bleeder. Is there a tube fitting available to solve this problem? Thanks Fordbarn for your previous help and I know someone will have...

Thanks for the reply ! By "generic square gaskets" do you mean gasket material around the perimeter of the square opening on the manifold and on no other surfaces?

I have a stock 1965 Mustang 289 4v. With an Autolite 4100 carburetor. I can't seem to find the correct gaskets to mount the spacer to the manifold and the carburetor to the spacer. I have tried the major suppliers and they are all different.

I need an under dash courtesy light socket for a '65 Mustang, Galaxie, Falcon,or other Ford products Art 815 744-6410 IL.

I have (1) set of N.O.S Timken front wheel bearings. Fits Model T '09-'27. Made in USA. Price is bearings only! Shipping is extra. :)

I need a GOOD 14"wheel for a 1965 Mustang 289 V8 4.7L. Must have 5 good lug holes and be straight.

Thank you all for your input. I have my problem solved Art

:mad:Does anyone know the correct part number for the front wheel (drum brake)cylinder for the title car?