Recent content by AldeanFan

I did this and it worked ok. My 239 y block had bad blow by. I put a pcv grommet in the road draft tube and a pcv valve for a 302 mustang, that’s what I had on hand. Then I ran a hose to the intake vacuum port. All the fumes got sucked up and burnt. I probably drove 3000km with that setup...

Thanks, The engine is a ‘56 292 with a ‘57 intake, I still have the stock 239 but it needs a rebuild and the 292 really makes this car go. Sent from my iPhone using Tapatalk

I love my ‘54 Country Squire. It’s a great driver and a great looker. Sent from my iPhone using Tapatalk

That proves it, Standard shift intake bell crank does exist Sent from my iPhone using Tapatalk

I think there is a bell crank on the intake on std shift cars, I’m pretty sure I came across one on eBay when I was looking for the correct one for my car. I almost bought it then realized it didn’t have an arm for the kickdown linkage. Without the bellcrank on the intake the firewall...

It’s probably different. I bought 3 linkages for my ‘54 before I found one I could modify to work. My car is a ‘54 with a 292, Holley carb and fordomatic. The car originally came with a 239 y block and fordomatic. Sent from my iPhone using Tapatalk

NPD has a gauge and sending unit that comes as a matched set for '57 Tbird. I adapted them to fit my '54 Country Squire after running out of gas twice. The gauge bolts in the dash but looks slightly different because it doesn't have a "F" and "E". I shortened the sender arm and it works...

Re: Ford-o-matic Help! - FIXED! Thanks so much for your help, we fixed it last night. After removing the valve body, which turned out to me much less complicated than it appears, we pulled out the valve and it was clearly bent. I straightened it until it moved freely in the bore, removed a...

Thanks Bill, that's where I was leaning. any idea where I can get a new valve, or how to straighten the one I have?

Calling all Ford Transmission experts, I don't know alot about transmissions and I've gone as far as Im comfortable going. Please excuse me if I'm not using the correct terminology. I'm trying to get my '54 Country Squire on the road. and the transmission is being a problem. As far as I know...