Recent content by 8CM

get the correct tape for a good snug hit cut and fit and tape it to the glass with electrical tape rub some oil on the tape start the frames and either pound them on or use clamps there are 4 different thickness of tape

Hi if you are still grinding i have a 8cm cam what can you do with that?? 1007b or potvin 3/8 its going in a 49 f100 .060 merc w. 350 holley 2 bbl... suggestions?? ive noticed the 8cm cam does pull prety good.... Rick

On those truck bells no adaptor needed weld a couple thick lugs where needed drill and tap the chev bolt patteren and finally mill 1/8 of the surface that should give enough purchase

The chromes stay in the rubber when removing, push out from the inside working the rubber off the body with a hook tool as u push if stuck on adhesive wd 40 does soften the glue when installing the chromes go in the rubber first then the pull string Rick

Yes glue them in tape in place until set up

bill is right chrome after but if u cant get the center bar in the glass either has to move out to the side or it is too wide and will have to be ground repop rubbers are no fun Rick

try little one inch pieces until you find the one that will go to gether without too much force, i tape the rubber to the glass with electrcal tape rub some motor oil on outside of tape it makes life easier Rick in BC

Someone should know what the CFM would be on a a pair of 94 carbs,,,bin thinkin of trying a 500 holley 2 bbl jetted down

Usually once you get the lift arms out of the slot you should be able to rotate the glass in the door and it goes out the top,,good luck

On my 49 f1 used 215/70/16 bridgestone dueller HT

Wuz wondering what dwell to set on the Bubbas chev 8ba conversion, same as sbc at 30 or what,,, Rick

Window in up position loosen regulator screws (4) push it into door and crank and slide the arms out of the holes in the slots

Yes it could be 33 doors on a 34 the channel doesnt have that extra lug on it

Hey guys does someone have measurements for location of the steel channel on the door glass we put this thing together with it centered now glass wants to tilt and bind up?????? this car does not have the slideback feature

For what its worth im using 225/70/16 bridgestone dueller Ht on stock 49 f1 rims