Recent content by 4ford

I have a 1941 ford drive train with 378 gears. new brakes and drums. three speed column shiftier with new clutch and pressure plate and resurfaced flywheel about 500 miles on them. trans works well ,as well as the banjo worked well changed drive train out... mike 612-850-9134

hello anyone have information on body mounts on a 1941 coupe? how many ? and where there placed? thanks for your help mike

JM 35 so the puller is a press fit on the hub i dont remember a grove in the hub to bite into? the collar slides over it and makes a tight fit to pull??

any idea how thick the rubber is I have some dents in the metal and trying to get straight but there should be some forgivingness in the rubber??

thank you the bolts are they going to be painted black?

didn't see any

installing new rubber on the running boards a few questions I have. should the surface be paint free? and do you bolt threw the rubber in the two spots the arms come out from the car? or should the bolts be flat headed under rubber? and who has the better rubber to install. thank you for...

does anyone have a good picture of the package try in a 41 tudor coupe that they could share with me trying to redo mine and have nothing to go on.. thank you mike

ok a stupid question on a 1941 59ab how and where do you install thermostats?? will they stay in the hose buy themselves??

zzlegend, how much play is in your shafts??

have to try to make something to fit 3 speed trans

these carbs also have an issue the store I got them from said is not a problem there's .010 play in the shafts so getting over sized shafts from speedway and see if this works ok these are holly knock offs ( bully carbs) and got them from the (carb shop) in mpls mn don't get anything from...

pickup that would be a great idea maybe someone has tried and has pics thanks

I have a1941 ford coupe and installed a backup camera, right now its hooked to the parking lights cant find mirror's that work on that car:mad: so the back up camera works well but with out backup lights I am trying to figure out how to switch the camera on other than the lights?? any on have...

what should I have for jets and power valve? 59 ab duel carbs offy heads offy manifold max 1 cam .030 over any thoughts thanks