Recent content by 30-Coupe

  1. 3

    Help!, Installing my 30 Coupe Hydem Welting

    Hi All, We are installing the wire-on welting on my 30-Coupe 45-B. However, we can't seem to find a how and where the welting meets or overlaps the other welting. and how they are terminated. I have purchased the two polished pointed end pieces but am now wondering if we need four pieces...
  2. 3

    Recommendations Installing Top Wire On Welting

    Yes, it's the long grain black material and was attached 15 years ago using tacks. Now, we are trying to tack some black wired welting into the same channel that was used to secure the top material. We were thinking that it might be easier to pull each tack and use the same take hole to secure...
  3. 3

    Recommendations Installing Top Wire On Welting

    Found out today that my top wood his harder than nails. In addition, since the Black Roof material has already been installed, finding the little holes in the metal channel (using an ice pick) is really a challenge. We are about to start drilling holes and then sink brads in each to secure...
  4. 3

    Front Splash Apron and Welting

    Yup, your right. My 1930 has one pad. Thanks.
  5. 3

    Front Splash Apron and Welting

    Hi, Interesting that your aprons are spot welded. Mine are bolted together and I am just now putting things back together after painting. I believe that the 1930 aprons are supposed to have a small bead welting (same size as the gas tank welting) that snakes its way between the front fender and...
  6. 3

    Front Splash Apron and Welting

    Hi, What Color is the Front Splash Apron Painted? Black or Body color? I looked in the Judging standards but could not find information about this. Perhaps it's there, but I missed it. Also, the Judging standards indicates that only the rear fenders are to be fitted with welting. The front...
  7. 3

    Need a rear spare tire reinforcing carrier

    Oh wow, How perfect is this. Thanks a bunch. Although I have been buying from Brattons for years, I could not find these parts. I'm going to go back on line now that I have the actual part numbers. We really appreciate your reply. Very helpful. Vince
  8. 3

    Need a rear spare tire reinforcing carrier

    Early 30 coupe, model 45-B
  9. 3

    Need a rear spare tire reinforcing carrier

    Hi, This is not the support piece that has one hole and is mounted vertically on the inside of the rear panel. It is the curved piece that mounts from the above mentioned support with one nut and curves horizontally under and connects to the floor pan. It actually transfers and supports the...
  10. 3

    Stone Guard Needed.

    Looking for a Stone Guard for my 1930 Std. Coupe. Thanks
Back
Top