Media added by Terry NJ

Navigation

Browse albums

Trending media

Red arrow points to 1 of 4 bolts that hold the steel back to wooden seat base/frame.

Red arrow points to 1 of 4 bolts that hold the steel back to wooden seat base/frame.

  • Media owner Terry NJ
  • Date added Nov 16, 2014
  • Reaction score 0
  • Comments 0
Close up of peg,

Close up of peg,

  • Media owner Terry NJ
  • Date added Nov 16, 2014
  • Reaction score 0
  • Comments 0
Red arrows point to the pegs, on the wooden seat base, that the wooden spring base/frame slides over.

Red arrows point to the pegs, on the wooden seat base, that the wooden spring base/frame slides over.

  • Media owner Terry NJ
  • Date added Nov 16, 2014
  • Reaction score 0
  • Comments 0
Close up of peg in position

Close up of peg in position

  • Media owner Terry NJ
  • Date added Nov 16, 2014
  • Reaction score 0
  • Comments 0
This is the front seat spring with the "outrigger wire" and burlap on, ready for upholstery. Red arrows show the pegs that the wooden spring base slip

This is the front seat spring with the "outrigger wire" and burlap on, ready for upholstery. Red arrows show the pegs that the wooden spring base slip

  • Media owner Terry NJ
  • Date added Nov 16, 2014
  • Reaction score 0
  • Comments 0
The red arrows point out the tabs that attach the backrest spring to the wood and steel seat body

The red arrows point out the tabs that attach the backrest spring to the wood and steel seat body

  • Media owner Terry NJ
  • Date added Nov 16, 2014
  • Reaction score 0
  • Comments 0
This pic shows the tabs that connect the backrest spring to the wood

This pic shows the tabs that connect the backrest spring to the wood

  • Media owner Terry NJ
  • Date added Nov 16, 2014
  • Reaction score 0
  • Comments 0
1' X 2 5/8 X 1/8 thick material

1' X 2 5/8 X 1/8 thick material

  • Media owner Terry NJ
  • Date added Nov 14, 2014
  • Reaction score 0
  • Comments 0
Length of 1st bend, middle section, 5/8"

Length of 1st bend, middle section, 5/8"

  • Media owner Terry NJ
  • Date added Nov 14, 2014
  • Reaction score 0
  • Comments 0
Distance from wood at opening , 1 "

Distance from wood at opening , 1 "

  • Media owner Terry NJ
  • Date added Nov 14, 2014
  • Reaction score 0
  • Comments 0
Length of the bottom surface, 1 1/2" and screw layout. Material width-1" X 1/8 " thick

Length of the bottom surface, 1 1/2" and screw layout. Material width-1" X 1/8 " thick

  • Media owner Terry NJ
  • Date added Nov 14, 2014
  • Reaction score 0
  • Comments 0
This is the front piece of the rear seat Note right edge of the wood and see 1' X 1/8" cut on what is the bottom. This cut creates a "shelf" or undef

This is the front piece of the rear seat Note right edge of the wood and see 1' X 1/8" cut on what is the bottom. This cut creates a "shelf" or undef

  • Media owner Terry NJ
  • Date added Nov 13, 2014
  • Reaction score 0
  • Comments 0
The Joint in the old original wood. Note Pegs reinforcing the mortise and tenon joint.

The Joint in the old original wood. Note Pegs reinforcing the mortise and tenon joint.

  • Media owner Terry NJ
  • Date added Nov 13, 2014
  • Reaction score 0
  • Comments 0
1" reduction in width at both ends at the rear of the seat.

1" reduction in width at both ends at the rear of the seat.

  • Media owner Terry NJ
  • Date added Nov 13, 2014
  • Reaction score 0
  • Comments 0
Dimensions The hole in the center is 12 3/4" x 37 1/8" (37 1/4)

Dimensions The hole in the center is 12 3/4" x 37 1/8" (37 1/4)

  • Media owner Terry NJ
  • Date added Nov 13, 2014
  • Reaction score 0
  • Comments 1
My new wood for the rear seat base

My new wood for the rear seat base

  • Media owner Terry NJ
  • Date added Nov 13, 2014
  • Reaction score 0
  • Comments 0
Front seat before painting. This wood is not available! Except for the base (Black) Neither the two upright pieces (L and R) or the pieces (3) that

Front seat before painting. This wood is not available! Except for the base (Black) Neither the two upright pieces (L and R) or the pieces (3) that

  • Media owner Terry NJ
  • Date added Nov 11, 2014
  • Reaction score 0
  • Comments 0
Seat parts laid out. The wood across the top was good yet. The metal was somewhat rotted so I welded on a piece of Banding strap across the bottom (N

Seat parts laid out. The wood across the top was good yet. The metal was somewhat rotted so I welded on a piece of Banding strap across the bottom (N

  • Media owner Terry NJ
  • Date added Nov 11, 2014
  • Reaction score 0
  • Comments 0
Side plates and new wood for front seat. This wood is not available and must be made.

Side plates and new wood for front seat. This wood is not available and must be made.

  • Media owner Terry NJ
  • Date added Nov 11, 2014
  • Reaction score 0
  • Comments 0
Patch panel welded in, Front seat back.

Patch panel welded in, Front seat back.

  • Media owner Terry NJ
  • Date added Nov 11, 2014
  • Reaction score 0
  • Comments 0
Patch panels in the front seat back.

Patch panels in the front seat back.

  • Media owner Terry NJ
  • Date added Nov 11, 2014
  • Reaction score 0
  • Comments 0
side view of the fenders. Fenders are just back from thew painter

side view of the fenders. Fenders are just back from thew painter

  • Media owner Terry NJ
  • Date added Nov 9, 2014
  • Reaction score 0
  • Comments 0
Fenders and running boards back from the painter

Fenders and running boards back from the painter

  • Media owner Terry NJ
  • Date added Nov 9, 2014
  • Reaction score 0
  • Comments 0
Right rear shock mount

Right rear shock mount

  • Media owner Terry NJ
  • Date added Nov 9, 2014
  • Reaction score 0
  • Comments 0
Back
Top