Media added by James Rogers

P1000406 Rear main before cutting groove and chamfering oil delivery holes. The sealer residue is from RTV used to position shim packs before the caps

P1000406 Rear main before cutting groove and chamfering oil delivery holes. The sealer residue is from RTV used to position shim packs before the caps

  • Reaction score 0
  • Comments 0
P1000407 Rear main before cutting groove and chamfering oil delivery holes

P1000407 Rear main before cutting groove and chamfering oil delivery holes

  • Reaction score 0
  • Comments 0
P1000408 Center cap before cutting groove

P1000408 Center cap before cutting groove

  • Reaction score 0
  • Comments 0
P1000409 Front cap before cutting groove

P1000409 Front cap before cutting groove

  • Reaction score 0
  • Comments 0
P1000410 With groove and chamfer

P1000410 With groove and chamfer

  • Reaction score 0
  • Comments 0
P1000411 With groove and chamfer

P1000411 With groove and chamfer

  • Reaction score 0
  • Comments 0
P1000412 With groove and chamfer

P1000412 With groove and chamfer

  • Reaction score 0
  • Comments 0
P1000174 Sunnen rod checker. Rod checked dead on 0 out of the box. Will check it again on a digital checker later.

P1000174 Sunnen rod checker. Rod checked dead on 0 out of the box. Will check it again on a digital checker later.

  • Reaction score 0
  • Comments 0
P1000173 Measurement of bushing after honing. .0105 was removed.

P1000173 Measurement of bushing after honing. .0105 was removed.

  • Reaction score 0
  • Comments 0
P1000172 Another view.

P1000172 Another view.

  • Reaction score 0
  • Comments 0
P1000171 Wrist pin diameter 1.000

P1000171 Wrist pin diameter 1.000

  • Reaction score 0
  • Comments 0
P1000170 The pin after honing with .0005 fit.

P1000170 The pin after honing with .0005 fit.

  • Reaction score 0
  • Comments 0
P1000168 Random wrist pin from a new box of pistons.

P1000168 Random wrist pin from a new box of pistons.

  • Reaction score 0
  • Comments 0
P1000167 Wrist pin oiler holes predrilled and cleaned.

P1000167 Wrist pin oiler holes predrilled and cleaned.

  • Reaction score 0
  • Comments 0
P1000166 Forging designation.

P1000166 Forging designation.

  • Reaction score 0
  • Comments 0
P1000165 Close up view.

P1000165 Close up view.

  • Reaction score 0
  • Comments 0
P1000164 Measurement of pin bushing before honing. .990

P1000164 Measurement of pin bushing before honing. .990

  • Reaction score 0
  • Comments 0
P1000163 The rod, nice.

P1000163 The rod, nice.

  • Reaction score 0
  • Comments 0
P1000162 Wrapper sealed at manufacturers to prevent rust or shelf damage

P1000162 Wrapper sealed at manufacturers to prevent rust or shelf damage

  • Reaction score 0
  • Comments 0
P1000161 My first look at one of these rods.

P1000161 My first look at one of these rods.

  • Reaction score 0
  • Comments 0
P1000160 unopened rod box chosen at random.

P1000160 unopened rod box chosen at random.

  • Reaction score 0
  • Comments 0
101 0170

101 0170

  • Reaction score 0
  • Comments 0
101 0171

101 0171

  • Reaction score 0
  • Comments 0
101 0166

101 0166

  • Reaction score 0
  • Comments 0
Back
Top