Media added by CA Victoria

Navigation

Browse albums

Trending media

67839D2B B97B 4619 920D 9EB3DC227ED6

67839D2B B97B 4619 920D 9EB3DC227ED6

  • Reaction score 0
  • Comments 0
12DF788A 04B2 42B0 92C3 FD20810B03F2

12DF788A 04B2 42B0 92C3 FD20810B03F2

  • Reaction score 0
  • Comments 0
I didn’t want to clutter up the dash with a 3rd gauge. I used a gen charge light to monitor the conditions from the driver seat.

I didn’t want to clutter up the dash with a 3rd gauge. I used a gen charge light to monitor the conditions from the driver seat.

  • Reaction score 0
  • Comments 0
D4B8409A 1C4C 41FD 9FB2 4EA769FBDEE3

D4B8409A 1C4C 41FD 9FB2 4EA769FBDEE3

  • Reaction score 0
  • Comments 0
Couldn’t find another 2 gauge panel I liked so I made this one, it sets back a bit. I put the gen charge light in this panel.

Couldn’t find another 2 gauge panel I liked so I made this one, it sets back a bit. I put the gen charge light in this panel.

  • Reaction score 0
  • Comments 0
46DF5352 D828 434A B3D4 E291594F06D0

46DF5352 D828 434A B3D4 E291594F06D0

  • Reaction score 0
  • Comments 0
Work began on July 31, 2021 with sandblasting cab & frame. Goal was to be able to drive it to the RPM Nationals in Santa Margarita California on Septe

Work began on July 31, 2021 with sandblasting cab & frame. Goal was to be able to drive it to the RPM Nationals in Santa Margarita California on Septe

  • Reaction score 0
  • Comments 0
57D7B687 1ADD 40B0 B14B 27DD645E4F19

57D7B687 1ADD 40B0 B14B 27DD645E4F19

  • Reaction score 0
  • Comments 0
96CE737A 0C1B 4BEF AD9D 8C6C7854C04D

96CE737A 0C1B 4BEF AD9D 8C6C7854C04D

  • Reaction score 0
  • Comments 0
19ED2F50 9C7A 4EBC BE49 CF999C7E684D

19ED2F50 9C7A 4EBC BE49 CF999C7E684D

  • Reaction score 0
  • Comments 0
5AA92CE7 7FBD 477E A37F 04DC89A4F9E1

5AA92CE7 7FBD 477E A37F 04DC89A4F9E1

  • Reaction score 0
  • Comments 0
fresh 59a ready to rumble!

fresh 59a ready to rumble!

  • Reaction score 0
  • Comments 0
almost ready to push the “go” button.

almost ready to push the “go” button.

  • Reaction score 0
  • Comments 0
1.75 SS tubing with 12” Brockman steel pack mufflers

1.75 SS tubing with 12” Brockman steel pack mufflers

  • Reaction score 0
  • Comments 0
35-7 Ford Pickup body blocks made from poplar

35-7 Ford Pickup body blocks made from poplar

  • Reaction score 0
  • Comments 0
good rear fenders off of a 37 pickup. Both need front patch panels.

good rear fenders off of a 37 pickup. Both need front patch panels.

  • Reaction score 0
  • Comments 0
lower patch panel from Howell’s. OK fit needed to adjust the curve, bottom curve off a bit.

lower patch panel from Howell’s. OK fit needed to adjust the curve, bottom curve off a bit.

  • Reaction score 0
  • Comments 0
Re worked 35 ford truck floor board to fit pickup

Re worked 35 ford truck floor board to fit pickup

  • Reaction score 0
  • Comments 0
Oil filter with block plumbing before drilling for fuel lines. Used as a junction to connect hard fuel line to flex line from engine.

Oil filter with block plumbing before drilling for fuel lines. Used as a junction to connect hard fuel line to flex line from engine.

  • Reaction score 0
  • Comments 0
Bed sides from Washington State. Tail gate from Atascadero. Subframe from Mack Hils. Metal bed floor from Arroyo Grande.

Bed sides from Washington State. Tail gate from Atascadero. Subframe from Mack Hils. Metal bed floor from Arroyo Grande.

  • Reaction score 0
  • Comments 0
Lower cowl rust repaired, Starting rough mock-up of Front sheet metal

Lower cowl rust repaired, Starting rough mock-up of Front sheet metal

  • Reaction score 0
  • Comments 0
completed oil filter block with fuel block and passage for fuel pressure gauge on top.

completed oil filter block with fuel block and passage for fuel pressure gauge on top.

  • Reaction score 0
  • Comments 0
The block was modified for oil flow in and out. The commercial filter bases looked cheap. Made this one to hold the filter, it is also a fuel block

The block was modified for oil flow in and out. The commercial filter bases looked cheap. Made this one to hold the filter, it is also a fuel block

  • Reaction score 0
  • Comments 0
Truck fuel tank modified to house electrical components, battery, extra switches etc. using a suburban 3rd seat mounted on top, will need to tilt to a

Truck fuel tank modified to house electrical components, battery, extra switches etc. using a suburban 3rd seat mounted on top, will need to tilt to a

  • Reaction score 0
  • Comments 0
Back
Top