Media added by Brace Bailey

Navigation

Browse albums

Trending media

35DE379B FB98 471E 932B 64F23737E32A

35DE379B FB98 471E 932B 64F23737E32A

  • Reaction score 0
  • Comments 0
DA3E535C 80D0 4569 83F4 DED0B3EFEE81

DA3E535C 80D0 4569 83F4 DED0B3EFEE81

  • Reaction score 0
  • Comments 0
Completed Truck. Pretty much done

Completed Truck. Pretty much done

  • Reaction score 0
  • Comments 0
Next step is the visor - then the roof

Next step is the visor - then the roof

  • Reaction score 0
  • Comments 0
New chrome levers and knobs

New chrome levers and knobs

  • Reaction score 0
  • Comments 0
Windshield installed and clamped shut. Yea!!!

Windshield installed and clamped shut. Yea!!!

  • Reaction score 0
  • Comments 0
Welting around header apron, gasket between it and the windshield hinge.

Welting around header apron, gasket between it and the windshield hinge.

  • Reaction score 0
  • Comments 0
Gas tank and welting installed. Belt rail takes 5/16” fine thread bolts.

Gas tank and welting installed. Belt rail takes 5/16” fine thread bolts.

  • Reaction score 0
  • Comments 0
Stainless trim on white oak

Stainless trim on white oak

  • Reaction score 0
  • Comments 0
Grooves cut, panel installed (with protective plastic cover) Turns out I had to remove the center strips so I could get the plastic off the stainless

Grooves cut, panel installed (with protective plastic cover) Turns out I had to remove the center strips so I could get the plastic off the stainless

  • Reaction score 0
  • Comments 0
Boards spaced correctly - tape on wood so I can mark new grooves

Boards spaced correctly - tape on wood so I can mark new grooves

  • Reaction score 0
  • Comments 0
Passenger side just as bad. Lots of measuring to figure out where to drill the mounting holes.

Passenger side just as bad. Lots of measuring to figure out where to drill the mounting holes.

  • Reaction score 0
  • Comments 0
This is where the front mount is suppose to be. Totally gone.

This is where the front mount is suppose to be. Totally gone.

  • Reaction score 0
  • Comments 0
Front cab mount reinforcement (holes are for plug welding)

Front cab mount reinforcement (holes are for plug welding)

  • Reaction score 0
  • Comments 0
The New Grill from Milt’s fire. Lots of sanding, dent removal and buffing. Will surround the new 4psi radiator

The New Grill from Milt’s fire. Lots of sanding, dent removal and buffing. Will surround the new 4psi radiator

  • Reaction score 0
  • Comments 0
The truck that inspired it all - from Texas.

The truck that inspired it all - from Texas.

  • Reaction score 0
  • Comments 0
First qt of paint - inside of cab, firewall inside and out

First qt of paint - inside of cab, firewall inside and out

  • Reaction score 0
  • Comments 0
Hood top halves only had two coats. Were pretty dented up.

Hood top halves only had two coats. Were pretty dented up.

  • Reaction score 0
  • Comments 0
Paint remover worked well - have to scrape off

Paint remover worked well - have to scrape off

  • Reaction score 0
  • Comments 0
Running boards re-covered and glued. Diana helped during the contact cement process. Real challenge to get the mat under the trim

Running boards re-covered and glued. Diana helped during the contact cement process. Real challenge to get the mat under the trim

  • Reaction score 0
  • Comments 0
Riveted the patent plate to the firewall. Original holes

Riveted the patent plate to the firewall. Original holes

  • Reaction score 0
  • Comments 0
Hood - ready for wet sanding with 1000 grit.

Hood - ready for wet sanding with 1000 grit.

  • Reaction score 0
  • Comments 0
Back window in - 22 screws, 4 corners, real pain in the ***

Back window in - 22 screws, 4 corners, real pain in the ***

  • Reaction score 0
  • Comments 0
Installed the under visor windshield mount. Wouldn’t fit until I squished it together and clamped it. Nailed into position. Now I’m told there is

Installed the under visor windshield mount. Wouldn’t fit until I squished it together and clamped it. Nailed into position. Now I’m told there is

  • Reaction score 0
  • Comments 0
Back
Top