I do appreciate the help.............

Ed, it looks like you pulled the air filter off her too, I did the same thing with Sister and she seems to run way better, even sounds better....what are your thoughts since pulling it off?

Nick

I hadn't drove Sarah but once when I test drove her before removing the filter, so I can't really comment on performance. What really made me remove the Maze filter was the fear of burning alive, after I'm dead and gone, it won't matter then. :D
 
Nice looking motor area Ed. Glad to see you replaced the old iron gas filter. I to did this and it sure gives me a better idea if stuff in coming out of the gas tank to the carb. I know replacing the iron filter is a no-no but mine is a driver and I want it to run!
 
Ahoy! Ed looks great! My Model A came without an air filter... That's a personal choice of each owner depending upon the roads and dirt they drive on as well as some prefer not having paper and gasoline (If you flood your car) next to a 450F exhaust pipe.. Things to think about either way..
 
Can't figure out what the line is coming out the firewall and going back under the body. It looks like it may be real close to the motor mount, if not wearing against it.
Bob
 
Can't figure out what the line is coming out the firewall and going back under the body. It looks like it may be real close to the motor mount, if not wearing against it.
Bob

Yes, speedo cable. The cable housing does rest against the motor mount but it's not forced up against it.
 
Yes, speedo cable. The cable housing does rest against the motor mount but it's not forced up against it.

there should be a grommett in the hole at the firewall plus a support clip on the frame rail along with another clip mounted inside the firewall behind the gas tank
 

Attachments

  • image.jpg
    image.jpg
    42.8 KB · Views: 14
Last edited:
there should be a grommett in the hole at the firewall plus a bracket on the frame rail along with another clip mounted inside the firewall behind the gas tank

Got the grommet but no bracket on the frame. I'll check for the clip when it get daylight. I'll put the bracket on my next order.

Thanks Mitch.
 
Got the grommet but no bracket on the frame. I'll check for the clip when it get daylight. I'll put the bracket on my next order.

Thanks Mitch.

i dont have the JS book in front of me but it shows the proper orientation of the speedo frame support clip
 
i dont have the JS book in front of me but it shows the proper orientation of the speedo frame support clip

Page 83, Les Pearson book tells about the routing. I do have the clip attached to the inside firewall. I will have a closer look later today. Got chores.
 
Sounds like you're having great fun. Enjoy this new lady in your life like the honeymoon will never end. Keep the keyboard and the Model A seat warm and you will have the time of your life. Wayne
 
Sounds like you're having great fun. Enjoy this new lady in your life like the honeymoon will never end. Keep the keyboard and the Model A seat warm and you will have the time of your life. Wayne

I am Wayne...I feel like a kid again being seduced by an older lady!!!! :D
 
speedo cable!!! sans clips and gromett.
Thanks to Mitch. the apple didn't fall far from the tree.
Give Bill my best regards.
Bob
 
Got the grommet but no bracket on the frame. I'll check for the clip when it get daylight. I'll put the bracket on my next order.

Thanks Mitch.

Bracket is there Mitch, attached to the frame with the cable attached properly to the bracket.................
 
Keep the "Q"s coming love your posts How does it feel being a Newbe :-)

Other than being hammered now and then....great!!! I'm learning exactly what I came here to learn and to meet like minded people........the only improvement to the forum I could suggest is....more single ladies to chat up!!!! To some, maybe my post count is over the moon for only being here a month but just think what it would be with some ladies about!!!!! :D
 
Back
Top