Steering Arm Bushings

dmaxweb

dmaxweb

Well-known member
I've checked the major supplier catalogs and cannot find the bushings that go in the hole in wheel spindle forging for the steering arms.
Does someone have a part #?

If not, I'll give the suppliers a call tomorrow.
 
The "steering arms"??? You mean the A-3130 Spindle Arm (Right) and the A-3131 Spindle Arm (Left)?....There are NO bushings to put into the "wheel spindle", A-3105 Spindle Assembly, for these parts and that is why you did not see them in the catalogs!

Pluck
 
Last edited:
Steve Plucker said:
The "steering arms"??? You mean the A-3130 Spindle Arm (Right) and the A-3131 Spindle Arm (Left)?....There are NO bushings to put into the "wheel spindle", A-3105 Spindle Assembly, for these parts and that is why you did not see them in the catalogs!

Pluck
Click to expand...

You're right. I just went out and cleaned out the holes very well and they are just machined smooth. I didn't see any need for bushings in there but when I saw the grease fitting holes I thought I would ask just to make sure. Thanks
 
If you look at the shaft you see a groove in it. It is there so the grease can get around the spindle arm to the king pin.
 
You must log in or register to reply here.
Back
Top