Spring for original Vacuum Wiper Motor has arrived

[Joop]

The spring on my original wiper motor for the Coupe is missing

This is the one with the 2 screws on the front cover.

Would love to get a picture of one .

 

[Bick in New Zealand]

Re: Spring for original Vacuum Wiper Motor

Is this the spring on the inside of the mechanism or the arm?

 

[Mike V. Florida]

Re: Spring for original Vacuum Wiper Motor

It's not much more then a ball point pen spring.

 

[Joop]

Re: Spring for original Vacuum Wiper Motor

This is what I need

 

[J Franklin]

Re: Spring for original Vacuum Wiper Motor "Picture"

Check out the spring drawers at your local hardware store. I bet you'll find one.

 

[RonC]

Re: Spring for original Vacuum Wiper Motor "Picture"

Try Napa. I think they have an assortment

 

[Mike V. Florida]

Re: Spring for original Vacuum Wiper Motor "Picture"

Ball point pen spring?

 

[henry494]

Re: Spring for original Vacuum Wiper Motor "Picture"

Joop,
The spring in the attached photo is 7/8" overall. I had it in a jar with other vacuum wiper parts. Send me an e-mail if it's correct and you have not yet found one.

Dave Lopes

 

[ken ct]

Re: Spring for original Vacuum Wiper Motor "Picture"

The spring on my original wiper motor for the Coupe is missing

This is the one with the 2 screws on the front cover.

Would love to get a picture of one .

That should NOT be hard to dupicate,try a good old hardware store,i get most of my carb springs from them.A good store will have them loose in draws take your closest pick. ken ct.

 

[Joop]

Re: Spring for original Vacuum Wiper Motor "Picture"

Many thanks to Dave Lopes for sending me the Spring

Put it on, and the wiper came back to life.

Thanks