Fuel Pump Rebuilt

Status
Not open for further replies.
If you have the glass bowl filter pump and it DOES NOT have "AC" on the top it is not rebuildable. The valves are pressed in place and of a special size.
If you need another pump I would suggest Charlie Schwindler in NY he uses a special diaphragm material.
 
Not necessoryly so,you have to split the pump in 1/2 and look see in the top 1/2 if theres a little bracket w/2 small screws in it which holds the valves in. Those can be rebuilt.I have the parts to rebuild these. The new diaphragm must be transferred to the old stem.I have a way of doing this or I sell the new diaph. with the stem already attached. ken ct.
 
HOTROD_WILLIE said:
I need a fuel pump rebuilt for 59AB. Does anybody know anybody that can do the job? Thanks for the help.
Click to expand...
These pumps are typically not difficult to rebuild. However, if you are weary of taking this project on, I would suggest as others have, contacting
Charlie Schwindler in New York.
A very honest and ethical fellow that truly does good work.
 
I will echo earlier sentiments, if you are not comfortable with rebuilding it yourself, send it to Charlie NY, you'll be glad you did.
 
kube great to see you back I wonder now how long it will be before the stirrer needs help
 
HOTROD_WILLIE said:
Are you talking about Ken the one that had those 81 Carbs? I did not know he did fuel pumps. Well, the five I got from him says he doesn't as three of them didn't work. The fuel pump needs to look right. They are going on a show car.Then stay away from "Rattle can - I don't test 'em" CT.
Click to expand...
 
Kube said:
HOTROD_WILLIE said:
Are you talking about Ken the one that had those 81 Carbs? I did not know he did fuel pumps. Well, the five I got from him says he doesn't as three of them didn't work. The fuel pump needs to look right. They are going on a show car.Then stay away from "Rattle can - I don't test 'em" CT.
Click to expand...
Thanks for the heads up. Glad to see you are back. I am given Charles a call. He seem to be the man.
Click to expand...
 
Kube said:
HOTROD_WILLIE said:
Thanks Willie.
Charlie truly is one heck of a good guy... you'll be pleased.
Click to expand...
Thanks for heads up. I have been burnt in the past. Buying Carbs. or dist. that were sand blasted and painted w/ rattle cans. Then you try to call the guy up. They hang the phone up on you and call you names. I don't know how they stay in business. I glad we have Fordbarn and the Hamb so we find the right people to buy from and do business with. Peace
Click to expand...
 
ITS ALL ABOUT PUTTING THEM ON A WORKING ,RUNNING ENGINE,,, AND TRYING THEM OUT,, BEFOR !! ! YOU SEND THEM BACK TOO THE CUSTOMER ! I too fell victim to A "mr rattlecan", for my 295 dollar re-built carb that leaked , only to send it to Charlie for a 168 dollar re-rebuild . no problems now. Even got a follow up phone call,, to make sure. He,s the best. I like to here about the good guys and the not so good guys. Thats what this place is all about. Sharing info... ,good or bad... and tryin to help each other out WITH the decision. just my 2 cents mp
 
Last edited:
Status
Not open for further replies.
Back
Top