United Engine Specialists? Jerry Livingston

R

Ross6860

Senior Member
I found a couple posts referencing these guys, especially Mr Livingston.

Any other feedback on them?

I'm thinking of having them build my engine. It's an outright purchase so I don't have to hunt down a good block, usable crank, etc.

Prices are very reasonable for a 59AB built as requested. I think their base 59AB is $2600

He also told me about some specific mods that need to be done to put a 59AB in my '36, like trimming the crank snout back to clear the front cross-member. And why I may not want to put in an 8BA. Info like that is invaluable to someone like me.

Not many places where the builder actually calls you up to discuss your build ahead of time and knows exactly what it's going to take.
 
Last edited:
They built a 59 a engine for my 41,runs great,quiet .There delivery was not as promised,but worth the wait.A great value,would buy from them again.Phil
 
Ross6860 said:
I found a couple posts referencing these guys, especially Mr Livingston.

Any other feedback on them?

I'm thinking of having them build my engine. It's an outright purchase so I don't have to hunt down a good block, usable crank, etc.

Prices are very reasonable for a 59AB built as requested. I think their base 59AB is $2600

He also told me about some specific mods that need to be done to put a 59AB in my '36, like trimming the crank snout back to clear the front cross-member. And why I may not want to put in an 8BA. Info like that is invaluable to someone like me.

Not many places where the builder actually calls you up to discuss your build ahead of time and knows exactly what it's going to take.
Click to expand...



No mods needed to CS.I used a alternator with a pulley to mount the 36 fan (speedway)reg 46-48 pumps and As I remember the 36 front pulley,I found a top hose at NAPA that fits the 36 rad to 59 engine(do not recall the part number.)as I recall the bottom rad outlet and the 36 rad lined up.
 
I wonder where they find the blocks, on their website it says--

"Engine assemblies are completely dissasembled. Blocks, heads, rods and cranks are cleaned, magna-fluxed and checked for cracks. We do not use repaired blocks. All our blocks are crack free. All bolt holes are cleaned and tapped."

2600$ is almost too good of a price for a completly rebuilt engine outright with no core and with a never cracked or repaired block.
 
They tried to buy blocks from me in Canada a few years back. Cost to get them down there was to high. They buy from all over.
 
I would think they would get a lot from scrap yards. I made a deal with one close to here. They are going to start setting them to the side. And I can buy what I want for scrap price. The guy at the gate said he sees a few a week.
 
Kurt in NJ said:
I wonder where they find the blocks, on their website it says--

"Engine assemblies are completely dissasembled. Blocks, heads, rods and cranks are cleaned, magna-fluxed and checked for cracks. We do not use repaired blocks. All our blocks are crack free. All bolt holes are cleaned and tapped."

2600$ is almost too good of a price for a completly rebuilt engine outright with no core and with a never cracked or repaired block.
Click to expand...

Asked the same questions,had the same reservations.The owner of the company told me that he is a flathead guy and has a whole barn full of them,a lot of them came from "grain trucks"This guy runs flatheads on the saltflats."gone racing" was the reason they gave me for the delay in delivering my engine.I have never had an occasion to take the engine apart to check the quality of the work,why would you if it runs great.I feel that they provide a quality product at a fair price.Phil
 
Jerry built my 276 FH and I'm very happy. It runs great. I had to ship my rebuildable core since he didn't have any 59AB cores at the time. He paid for the shipping to him.
 
You must log in or register to reply here.
Back
Top