1939 Clutch Pedal Bushing Part Number

29AVEE8

29AVEE8

Senior Member
Gentlemen.

I have searched here and other sites, suppliers catalogs, etc., and still can't find what I am looking for. I am needing to replace the bushings in a '39 pedal assembly and am looking for the correct part number for the clutch shaft to pedal mount bracket bushing. I have acquired an N.O.S. brake pedal to clutch shaft bushing, (91A-7526), but cant find the part number for the clutch shaft to the housing bushing. Does anyone know the correct part number or have the exploded diagram of the '39 pedal assembly?

Many thanks, Mike.
 
Mike: 91A-7526 is the Clutch pedal bushing, 1.92" long.
B-7508-A is the Brake pedal bushing, Macs list it as 1" L X .940 OD. This same bushing was used 32-34 for the clutch release shaft through the transmission housing.

To add with barnfind08 mentions below: 91A-2470 Sleeve & bushing assembly (pedal bracket ) 1.19 OD X 3.62 L
 
Last edited:
Terry said:
Mike: 91A-7526 is the Clutch pedal bushing, 1.92" long.
B-7508-A is the Brake pedal bushing, Macs list it as 1" L X .940 OD. This same bushing was used 32-34 for the clutch release shaft through the transmission housing.
Click to expand...

The BRAKE bushing gets mis-supplied many times. The BRAKE pedal bushing is much bigger than all the other bushings. It's a lot bigger than the sizes quoted. I need one if anyone has a supply.

Mart.
 
Thanks for the reply's guys I have the very rare 91A-7526 that I believe is the brake pedal bushing, as the length 1.9xx looks to be the correct length. The MAC's info is kind of confusing and subsequently I think they stopped suppling any of those listed. If I actually had the pedal assembly apart all of this would likely become self explanatory but I was hoping to secure the proper pieces prior to disassembly. Once again thanks, and if If I find anything definitive I will pass it along.

Mike.
 
You must log in or register to reply here.
Back
Top