Fitting Tachometer - 1930 A

[John Spragg]

Hi all , has anyone fitted a tachometer to their A model? How do I do it and the best affordable way to go about it - all help appreciated. I am now 12 volt negative earth for my 30 coupe. John, Australia

 

[Old182]

ALinNY did a beautiful job putting one in his pickup. I'll email him and ask him to check this site.

 

[CarlG]

Here's mine: Tach is on the left, Water temp on right

 

[V4F]

very nice mount !!!


I went to an auto parts & bought a 2 1/2" tach & banded it to my steering column .

 

[Pete]

...

 

[klawockvet]

12 Volt Neg ground gives you the option of using the vintage Sun tachs. I believe the Sunpro repro tachs can be tuned to a banger motor. Summit Racing has them. I'm using a 6v tach from Snyders, mounted in an aluminum panel I made connected to the column drop.

 

[Stick Shift]

Thanks for sharing the pics and info. I have been thinking about doing something like this on my 29.

 

[azmodela]

...

It's cool to see yours still works. I had a few, but they eventually died.

 

[Jim Huseby]

Where do you get those small 270 deg. sweep 5000rpm tachs?

 

[CarlG]

Where do you get those small 270 deg. sweep 5000rpm tachs?

Mine (shown above in post #3) is an Autometer 2697 (2" diameter). I bought it from Amazon:
http://www.amazon.com/gp/product/B00062YWB0/?tag=atomicindus08-20

 

[hardtimes]

...

Hey Pete,
What's the source of your tach shown? Is it still available and how connected into system?

BTW....I'm working on a project that I'm finally going to get to use that cam that you created Lots of thorns on the path though..we'll see !

 

[Pete]

Hey Pete,
What's the source of your tach shown? Is it still available and how connected into system?

BTW....I'm working on a project that I'm finally going to get to use that cam that you created Lots of thorns on the path though..we'll see !

Buzz Pound made those about 10 years ago. I think they were based on a Westach. They are no longer available.

azmodela: They are just electronic parts. If yours are not mechanically hurt, they can be repaired.

 

[roccaas]

What's the redline on a flat 4 ?

 

[azmodela]

Buzz Pound made those about 10 years ago. I think they were based on a Westach. They are no longer available.

azmodela: They are just electronic parts. If yours are not mechanically hurt, they can be repaired.

They're old Sun or Sun Pro tachs, Buzz used to convert them to 6 volt negative ground systems in addition to the 12 volt one sold. I can't recall if any modification was necessary to make them 4 cyninder compatible.

I talked to Buzz several years ago about remaking them or learning the process to do it. It's complicated for the 6 volt versions. I did get the electronic file that has the new face from him.

 

[azmodela]

What's the redline on a flat 4 ?

It really depends, stock or modified? With the right components, some flat 4 VW's and Porsche's can make power into the 8000-10,000 rpm range.