Need help identifying early Ford engine parts

[lookin-backtexas]

I recently attended an estate auction and bought a box full of early Ford parts (some NOS). I am familiar with Model A's but Model T's are out of my comfort zone. Can anyone help identifying the following two parts?

One is shaped like a Model A water inlet pipe which bolts to the driver's side of the block however it does not have a boss and bolt at the top where Model A wiring would attach and it has a stamped "FORD" script on the side. It measures 3-1/4 inches wide (edge to edge at the bolt holes) and about 4-1/2 inches long at it's widest point.





The second one appears to be a water inlet pipe but it is not curved like a Model A would be. It is "stubby" and measures 3-7/8 inches across (edge to edge at the bolt holes) and about 2-7/8 inches deep.



Any help you can give me in correctly identifying these parts would be greatly appreciated!
Thanks,
Fred

 

[yachtsmanbill]

Top pic is the water inlet on the side of the Model T block, and the lower pics look like the head outlet for a low style brass radiator. Both look like they are almost NOS. ws

 

[lookin-backtexas]

Top pic is the water inlet on the side of the Model T block, and the lower pics look like the head outlet for a low style brass radiator. Both look like they are almost NOS. ws

Bill:
Thanks for the reply - I just found them looking in Snyder's catalog. Yes, they are both NOS and have Ford script.

The top one is a Model T water inlet 1909-27 (part no. T-3015) and the bottom one is a Model T cylinder head water outlet for 1909-1916 (part no. T-3004) for use with a brass radiator.
Fred

 

[yachtsmanbill]

A pleasure!! ws