manifold gasket

[41plym]

I'm replacing copper manifold gasket, it appears slightly different side to side due to the way it's made. Does it matter which side goes against the block? Thanks in advance.

 

[billwill]

usally there soe mark of soe kind saying so.

 

[mccsix]

huh?

 

[johnbuckley]

If not marked and fits either way round then either way is OK! If it has a crimped face ( like some head gaskets) then it mike be wise to have the crimp facing the manifold - if it indents the manifold it's easier to machine that flat than the engine, ( but that's small print stuff.)

 

[BILL WILLIAMSON]

If not marked and fits either way round then either way is OK! If it has a crimped face ( like some head gaskets) then it mike be wise to have the crimp facing the manifold - if it indents the manifold it's easier to machine that flat than the engine, ( but that's small print stuff.)

"EITHER WAY ROUND, OLD CHAP" Was a common saying by my old Jaguar Service Rep.
Greg asked, "Which way"? when he put in my copper gaskets. "Put 1 in one way & one in the other way & we'll see which one "blows" out first" Bill W.