1952 customline owners out there question

5

52fordv8

Member
i need a quick question out there does the 1952 ford customline sedan take a 9 1/2 inch clutch ????? im guessing it does . getting ready to order all this so and it will be a month or so before it goes in and dont want to order it wrong . and caint return it or exchange it .
 
In my opinion, I'd pull the transmission / engine first, depending on your approach, and see what you've got. A lot of things can be changed from original in 60 years. I used Fort Wayne clutch to rebuild mine, and I believe the turn-around was only about 2 days, not counting shipping.
You're probably better off using original, rebuilt parts.
Joe
 
Yes, the 52 passenger cars had a 9 1/2 inch clutch. I put a new clutch and pressure plate in with my rebuilt engine earlier this year. It is very disappointing, lots of clutch chatter. Find a NOS disk or get yours rebuilt like suggested above.
 
ok well i dont have anything to get rebuild when i baught this body it was just a roller had the trans and bell housing and etc thats it . im working on a eab engine to put back into the car and was just wondering the clutch size . i knew that it couldnt been 10 0r 11 inch i have some them around here that came off the flathead trucks .
 
You must log in or register to reply here.
Back
Top