Full rear Bumper

Aok

Aok

Well-known member
Thinking about putting a full rear bumper on my coupe.
Looking for a few photos of coupes or any cars with a full rear bumper. Spent about a hour looking through some old model A magazines and most photos are front or side photos.

Also do I need to change the bumper brackets my car has a rear spare tire
 
Why not just get one of those new curved spare tire guards. I have one on my 31 sport coupe to protect my metal tire cover. Looks great.
 
glenn in camino said:
Why not just get one of those new curved spare tire guards. I have one on my 31 sport coupe to protect my metal tire cover. Looks great.
Click to expand...
Most likely going to replace my bumpers so just trying to decide if I want to go with a full rear or the 2 piece one
 
I believe the full rear bumper is a front bumper. I'd have to look, but, I think there are pictures in the Judging Standards since it the last 'A' book I've read.
 
Was hoping for a photo or 2 as to what they looked like as most photos in magazines and on line tend to be front side I guess no one want to show off their rear end in public :D. With 2 suggestions for the spare tire guard, a option I had not thought of originally, I will also consider that as it also would give a finished look to the back bumper.
 
i like this look over the full bumper
 

Attachments

  • image.jpg
    image.jpg
    72.8 KB · Views: 99
Ford put a full width rear bumper on cars that had at least one side mount. I do not think that you can mount a full width rear bumper with a rear mounted spare. The full width rear bumper is just a front bumper mounted on the rear. Be careful when you make the change because early 1930 vehicles had a 62" wide bumper. Late 30 and 1931 vehicles had a 60" bumper. When you make the change, you will have to make 2 spacers to replace the bumper support that goes between the rear bumper arms and the rear bumper cross brace. See the picture on page 4-16 of the 2011 Restoration Guidelines and Judging Standards. I attached a picture of the rear bumper on my unrestored Victoria.
 

Attachments

  • IMG_3624s.jpg
    IMG_3624s.jpg
    132.1 KB · Views: 67
pics of the full rear bumper can be found in Jim Schild's book Ford Model A. # piece on pgs 68 and 105. Full one [front] pgs 9,20.89/97,107.
 
That is one nice Vicky!

Bill Cilker said:
Ford put a full width rear bumper on cars that had at least one side mount. I do not think that you can mount a full width rear bumper with a rear mounted spare. The full width rear bumper is just a front bumper mounted on the rear. Be careful when you make the change because early 1930 vehicles had a 62" wide bumper. Late 30 and 1931 vehicles had a 60" bumper. When you make the change, you will have to make 2 spacers to replace the bumper support that goes between the rear bumper arms and the rear bumper cross brace. See the picture on page 4-16 of the 2011 Restoration Guidelines and Judging Standards. I attached a picture of the rear bumper on my unrestored Victoria.
Click to expand...
 
Bill that is good information
Patrick page #'s make I easy I will take a look at the book.

In addition to the spare tire protector in the judging standards I found an ad in the unauthorized accessories book for a vendor that offered a deluxe spare protector and only $6
 

Attachments

  • sparebumper.jpg
    sparebumper.jpg
    45.4 KB · Views: 53
You must log in or register to reply here.
Back
Top