John Duden
Well-known member
where do i start................i've done some of these things too.

This is a good reminder for me to put safety cables inside my garage door springs first time one broke the car was not in the garage i had them in my old garage but forgot to put them in my new one thanksI had one of my garage door springs break/explode and hit the right front fender a couple of weeks ago. Wife and I hear the noise that night but I didn't know what it was until I tried to lift the door. My car isn't so nice that I really worried about the scratch.
Sure When a spring brakes on a older garage door like a lot of us have it wants to fly anywere and take out anything in it's way I was told by a old garage door installer with the spring stretched full to run a small rope cable true the center of the spring attach one side with cable clamps to the eyelet were the spring hooks on to the other side of the cable attach to the bracket that your springs hooks to That way when a spring brakes the cable holds the broken spring in place i hope this helps you (note if you have the garage door with the springs over the top of the door with a steel rod inside them no problum with broken springs just hard to open door till you replace them)After things like that happen, I usually say "It could have been worse". Don't really know if it makes me feel THAT much better, but...there will always be accidents involving us humans! Fordcoupe, could you expand on the installation of cables through the garage door springs? How many of us have these door springs, ready to let go??