Heater motor repair

fordy46

fordy46

Member
I have a couple of 41 thru 48 heater motors, 6 volt that need repaired, the kind that reverse for defrosters. Does anyone know of someone that can repair them. Thanks
 
fordy46 said:
I have a couple of 41 thru 48 heater motors, 6 volt that need repaired, the kind that reverse for defrosters. Does anyone know of someone that can repair them. Thanks
Click to expand...


New 6 and 12 volt motors are available from NAPA if you don't find a re builder. They are a physical direct replacement, BUT are single speed, two wire and reversible in operation. :)
 
46fatford said:
Could you make the single speed motor multi speed through the use of a rheostat?
Thanks
Matt
Click to expand...


Should be no problem, except for physical size, to dissipate the (wattage) heat. I will probably use two resistors to create 3 speeds. A reversing toggle will switch the rotation from heat to defrost.
 
there is a reostat that turns a single speed motor into a 3 speed, i bought one for my truck, it has a 5/8" shaft (i believe) that is held on by a nut on the back side of switch out of site, it has a round black knob, but no plate with the speeds on it, if worst comes to worst and you can find one let me know and i will give you info on it
 
you could order the wire loom from Mac's and carefully take the motor apart and splice the new wiring (with correct color code and ends to hook to switch), clean, lube and hook it up to an original reversing switch (available on E bay all the time) and hope for the best. I do these all the time and have had great luck with making older motors work.
 
here is he switch you can use to repair your motor. just go to mac's and order the wire loom and spend some quality time being at "ONE" with your project. Ebay #
330925188239
 
You must log in or register to reply here.
Back
Top