New Member Here

L

LockDoc

Junior Member
-

I just joined up a couple of days ago so I thought I would drop in on the A forum and post a few pictures of my basket case roadster. I have owned this for a year or so but have not started on it yet. The body was completely disassembled when I got it but I stuck it back together to make it easier to store. The frame has been blasted and painted black and I have most of the parts to put it together, except for a useable engine. It was an old street rod but luckily they didn't make any modifications that would be hard to correct. I'm looking forward to getting started on it but it won't be a show car, I enjoy driving them too much.

Good to be here.

LockDoc
 

Attachments

  • ModelA Roadster_05.jpg
    ModelA Roadster_05.jpg
    127.2 KB · Views: 161
  • ModelA Roadster_04.jpg
    ModelA Roadster_04.jpg
    99.5 KB · Views: 147
  • ModelA Roadster_02.jpg
    ModelA Roadster_02.jpg
    97.6 KB · Views: 144
  • ModelA Roadster_01.jpg
    ModelA Roadster_01.jpg
    106.2 KB · Views: 149
  • ModelA Roadster_07.jpg
    ModelA Roadster_07.jpg
    99.2 KB · Views: 168
Hey welcome
That roadster isn't bad, i have seen much worse. actually it looks to be in better shape than that chevy truck :D
any help you need just post it as there are a lot of smart dudes here..
 
Welcome to the Model A hobby. Engines are plentiful for the Model A. You should investigate a local chapter someone probably has a block that is useable.
 
Welcome to the barn! Looks like a good project. It is always good to see one being brought to life. Good luck.
 
welcome leon
you have alot of work but you are at the right place to get the help you need
kevin
1930 model a tudor
1923 model t roadster p/u
 
Thanks for the welcome fellas.

John LaVoy said:
Welcome to the Model A hobby. Engines are plentiful for the Model A. You should investigate a local chapter someone probably has a block that is useable.
Click to expand...

The guy I bought the car from gave me a book that lists the names of the members of the local chapter. Now I need to find it...

Hicktick said:
Looks like a good start , what are your plans for the roadster????

Welcome to the barn.
Click to expand...

Right now I just want to get it put together and moveable under it's own power. That will give me time to upgrade some of the parts that aren't in the best of shape. Thanks
LockDoc
 
Great car. The hardest part is to turn the first screw. If you don't have a shop, might I suggest the following items that have helped me to unbelieveable rate. First a compressor, (bigger is better) a sand blaster cabinet ( I got a great one from Harbor freight) , and a tumbler (again big is best) You can put a couple handfulls of parts in, and they are clean and polished with no work I all (I got mine at Eastwood)
Heres what mine looked like a while ago, now putting interior in
http://www.youtube.com/watch?v=bJHMrVqkvnw

Best of luck
 
Last edited:
You really shouldn't carry all that "eye candy" around in the back of a truck. We're the sort who can see a Zenith in a junkpile at 50 paces.

Glad you're aboard. Get ready to meet Bill and his Dog and just remember - it's a party. Some fellow party go-ers you like a lot, others you wish would stay home. But it's still a party and we all stay polite - mostly.

And I see you're good at pix. We all LOOOOVE pix.

mr_macgready.gif


Above is John Hoyt and his Model A in the Midas Muffler Commercial. He's the one who said "How do you think the richest man in town STAYS the richest man in town."

He's done his restoration - that's why.

See ya round, boy...

Joe K
 
Welcome to the Barn. Lots of good advice and good friends too. My last three A's were basket cases and I loved every minute of the reassemblies. The pix is part of the load that came home as a basket case - the S/W. ken
 

Attachments

  • charlotte9.jpg
    charlotte9.jpg
    126.4 KB · Views: 33
Thanks for the warm welcome!

ctvpa said:
Great car. The hardest part is to turn the first screw. If you don't have a shop, might I suggest the following items that have helped me to unbelieveable rate. First a compressor, (bigger is better) a sand blaster cabinet ( I got a great one from Harbor freight) , and a tumbler (again big is best) You can put a couple handfulls of parts in, and they are clean and polished with no work I all (I got mine at Eastwood)
Heres what mine looked like a while ago, now putting interior in
http://www.youtube.com/watch?v=bJHMrVqkvnw

Best of luck
Click to expand...

I have a pretty well equipped shop, in fact my wife says we are tool poor... I also have a small tumbler. What I found that works a lot better than a tumbler is an old cement mixer that I bought cheap. You can put a lot of stuff in that thing and it comes out like new. I use the old sand from my sand blaster in it.

That is a great video. I probably would have driven it around the block... j/k

Joe K said:
You really shouldn't carry all that "eye candy" around in the back of a truck. We're the sort who can see a Zenith in a junkpile at 50 paces.

Glad you're aboard. Get ready to meet Bill and his Dog and just remember - it's a party. Some fellow party go-ers you like a lot, others you wish would stay home. But it's still a party and we all stay polite - mostly.

And I see you're good at pix. We all LOOOOVE pix.

mr_macgready.gif


Above is John Hoyt and his Model A in the Midas Muffler Commercial. He's the one who said "How do you think the richest man in town STAYS the richest man in town."

He's done his restoration - that's why.

See ya round, boy...

Joe K
Click to expand...

Joe,

I'm ready for a "polite" party.

Like John, I try to do all of my own work. I do trade some mechanical work for some of the body work and painting. I can do it but it isn't one of my favorite things.

kenparker said:
Welcome to the Barn. Lots of good advice and good friends too. My last three A's were basket cases and I loved every minute of the reassemblies. The pix is part of the load that came home as a basket case - the S/W. ken
Click to expand...

Ken,

Most of your basket case parts are in much better shape that mine but I have a hammer, dolly, and a welder.

LockDoc
 
Welcome,and have fun putting your "A" back together, once shes done you"ll have a blast driving your Model "A". When I got mine back in 2002, it was a very drivable car, and every winter I would work on the car and drive in the spring/summer. Its done after 10 years and 48000 miles later, and like I said You"ll have a blast driving your Model "A". Good luck on your project!!
 
antiquepa said:
Welcome,and have fun putting your "A" back together, once shes done you"ll have a blast driving your Model "A". When I got mine back in 2002, it was a very drivable car, and every winter I would work on the car and drive in the spring/summer. Its done after 10 years and 48000 miles later, and like I said You"ll have a blast driving your Model "A". Good luck on your project!!
Click to expand...


Thanks antiquepa. I can't wait to start on it. I may be able to sneak a few hours into it this Spring...

LockDoc
 
You must log in or register to reply here.
Back
Top