Jim/GA
Well-known member
Jim, the only problem now is that it's hard to know what charge is going into the battery, because at some times most of the indicated amps are flowing to other circuits.
Technically you are correct, but it has never been a problem. My ammeter sits at zero most of the time (if the A/C is off). It shows about 10 amps of charge right after starting but that quickly drops to zero.
The only things I have on the circuit that pull current backwards through the ammeter are the A/C condenser fan and the compressor clutch. I know exactly where the ammeter needle falls for them when the A/C is on. Anything more or less than that is going to the battery. And any time the compressor cycles off, the ammeter drops to zero again. I could spot a problem during that time, if there was one.
It really does work out well.