32 parts....

jim1932

jim1932

Well-known member
City
Bethesda
State
MD
Thought I would post my latest list of needs for my 4 cylinder tudor:
1932 locking hubcap (or just a lock with a key for my 34 locking hubcap)
inside door and window handles (need one each but will take more)
Bumpers (only original, straight and no welds)
Driver front shock in rebuildable condition
fuel pump shaft that holds diaphram
carb throttle and choke shafts.

Thanks, PM me with price shipped if you have any.
 
I( have some NOS genuine Ford Pedal Pads but they are not for the faint of heart, I assume these would be used for competition only. I may have some old used ones, I'll look around. I shall also look for the locking hub cap, lock cylinder and keys. My email address is twinjoan@gmail.com. Elmer Swift 805-646-6440 or 805-458-0128
 
I did not find any used genny Ford pedal pads, all I have is a pair of NOS at $150.00. Moving on I have a spare lock assembly that I would Take out of a 34 locking hub cap. I want $80. for the lock cylinder only with one original key and 2 repos. I will sell the entire hub cap for $120.. It is a really nice one. Pictures on request. If you can use a lock assembly without key, I have one for $40.00. Elmer Swift
 
Still looking for shocks and bumpers and a spare tire lock (early) not the locking hubcap. And Carb throttle and choke shafts
 
What brand of carb parts are you looking for? I have a few Detroit Lub. carbs. I could rob some parts or sell you one of them but they don't use choke shafts.
 
Last edited:
All the parts for a 32 Zenith carb are found in Model A catalogs. Same stuff. I am ordering almost a whole carb in parts to rebuild one for a friend,
 
Andy said:
All the parts for a 32 Zenith carb are found in Model A catalogs. Same stuff. I am ordering almost a whole carb in parts to rebuild one for a friend,
Click to expand...

The throttle and choke shafts are the same? Those are the main parts I am after.
 
jim1932 said:
The throttle and choke shafts are the same? Those are the main parts I am after.
Click to expand...

I really hate it when some uninformed nut advises wrong info. I am now one of them. The Zenith III looks the same as the earlier models but the choke and throttle bores are bigger. I am very sorry to have missled you.
 
Last edited:
Jim,

I assume from your earlier photos that the interior door and window crank handles are the last '32 version without any point on the end that attaches to the mechanisms in the door, correct? If so, are you looking for useable originals or correct reproductions (which do exist)? Please advise as I may have some spare useable originals.

Dave
 
Dave, I don't have either inside door handle that is correct for the car so as long as the 2 are the same, it doesn't matter. I could use the escrutchens too.

Here is a picture of my window crank handle:
 

Attachments

  • window crank.jpg
    window crank.jpg
    19.4 KB · Views: 6
You must log in or register to reply here.
Back
Top