1932 3W Garnish Molding Bumper Pads

[WRA]

I will be installing my window garnish molding soon and I see the vendors sell a bumper pad of sorts.

CW Moss has the P/N B-45830, there are other examples, but none are consistently the same style or shape. I also do not see anything online or in my books concerning placement of these pads.

Does anyone have a recommendation of type, and even a diagram or picture of the correct type and installation.

Thanks

 

[Karl Wescott]

On an original steel garnish molding at the bottom of the window opening on the flange that faces the glass there are two or three slots about 3/16 high by 1" long. The bumpers go in the slots and are there to provide anti-rattle against the glass. Stock Ford did not have any fuzzy or wiper at the bottom of the window opening. There are two types of bumpers, one rounded, the other a bit more angled, one goes on the garnish the other on the door.

 

[rich b]

This is how the door & garnish bumpers are in my '35. If I remember right; my '33 Tudors were the same.

Likely the same for your '32.

 

[petehoovie]

This is how the door & garnish bumpers are in my '35. If I remember right; my '33 Tudors were the same.

Likely the same for your '32.