Cast Center Dump Headers?

[whygoby]

I'm trying to locate the cast CENTER DUMP headers that were recently brought out. These appear to be copied from the 1935 Miller Fords Henry had built for Indianapolis. Any leads would be greatly appreciated.

 

[Scotty's 52 F3]

I just put your question to AI and it says they are available directly from Harry A. Miller, Inc for $549.95 (248) 797-8781

It say's they are currently available. AI has been know to be off sometimes so you better check yourself to verify.

 

[TerryOH]

Just saw one side mounted on Instagram. The second side needs modification around the steering box from the posting

 

[40cpe]

https://www.harryamillerinc.com/

 

[petehoovie]

https://www.harryamillerinc.com/

 

[whygoby]

Thanks for the information on the Harry Miller company making the cast headers. The Speedway Museum in Lincoln, NE is updating their 35 Miller Ford with the correct Bonolite heads,..... and now the cast exhaust manifolds!!

 

[alchemy]

I checked that website and noticed the hardware supplied with the headers was only 3/8”. I sent a message to them asking about the fronts needing to be 7/16. Hopefully the headers have been tested for fit to a block.

 

[hotcoupe]

FWIW, I contacted the company and they indicated that those headers won't work with the stock wishbone suspension.
Tom

 

[Tim Ayers]

I checked that website and noticed the hardware supplied with the headers was only 3/8”. I sent a message to them asking about the fronts needing to be 7/16. Hopefully the headers have been tested for fit to a block.

Dennis Lacey had a few posts on Instagram recently about a roadster he is doing and he used these headers. They certainly do look nice.

Two points:

Car is using a stock '32 wishbone, but he hasn't completed the exhaust yet, so curious how he works around that. In the pictures, looks like there is plenty of clearance to make a connection.

He did need to scallop the driver's side to fit around the steering box. He hasn't posted pictures yet of this modification.