1941 Pickup spare tire carrier

Seth Swoboda

Seth Swoboda

Well-known member
Would someone be able to post some photos of the 1941 1/2 ton pickup spare tire carrier and how it attaches to the bed please?
Thanks!
 
I've tried.... can't figure out how to get pictures from my phone, to here. Sorry.
My pickup is pretty rough. Looks like maybe bracket was originally riveted. And mine is welded over. And, maybe an extra strap added at the top.
I need an education on how to transfer pictures with a new phone. Never had a problem with old phone. (frustrated)
 
That is what I was trying to figure out. Mine is welded onto the bed side. I wanted to know if they were welded/riveted or both. I had one V8 Club member send me photos so far.
 




Pretty sure the strap at the top was added...
 

Attachments

  • 20260408_190032.jpg
    20260408_190032.jpg
    21.9 KB · Views: 35
  • 20260408_190059.jpg
    20260408_190059.jpg
    38.7 KB · Views: 28
  • 20260408_190153.jpg
    20260408_190153.jpg
    43.8 KB · Views: 138
Mine has fell off hence me not trying to post a pic. The remnants do match the pics above, though. I think they were prone to fatigue failures. Like in the pics above mine also has evidence of multiple messy attempted welding repairs.
 
I agree with Mart, My 41 looks just like the picture above les the strap and multiple weld repairs. If you use the mount make sure the tire is resting on the runningboard. The mount itself can not take the stress. Tim
 
pistonbroke said:
I agree with Mart, My 41 looks just like the picture above les the strap and multiple weld repairs. If you use the mount make sure the tire is resting on the runningboard. The mount itself can not take the stress. Tim
Click to expand...

You are 100% correct in regard to the stress. That is why so many are missing or if there, lots of messy welds, etc. in attempts to make them useable.
The earlier design was so much better. Of course, the earlier design was much more costly...even back then, Ford was figuring out how to make things cheaper and cheaper, quality and longevity be damned.
 
Kube said:
You are 100% correct in regard to the stress. That is why so many are missing or if there, lots of messy welds, etc. in attempts to make them useable.
The earlier design was so much better. Of course, the earlier design was much more costly...even back then, Ford was figuring out how to make things cheaper and cheaper, quality and longevity be damned.
Click to expand...


Kube,


Were they welded on or riveted?
 
I have a friend who is looking for a '41 spare tire bracket. His is missing. He keeps eyeing mine up.


I don't know of anyone who makes these? Do you folks know of any that are reproduced?
 
Seth Swoboda said:
I have a friend who is looking for a '41 spare tire bracket. His is missing. He keeps eyeing mine up.


I don't know of anyone who makes these? Do you folks know of any that are reproduced?
Click to expand...
Back-order-Bob made them years ago. Perhaps there is one or more "out there".
 
Looking at the photo it's a relatively simple piece and given that it is hidden from view when in use, I'd have a go at making a reasonable facsimile if I needed one.

Edit: I found mine and it is a lot bigger than the photo suggests. I'll post some pics.

Mart.
 

Attachments

  • carrier04.jpg
    carrier04.jpg
    67.2 KB · Views: 41
  • carrier03.jpg
    carrier03.jpg
    43 KB · Views: 40
  • carrier02.jpg
    carrier02.jpg
    47.6 KB · Views: 43
  • carrier01.jpg
    carrier01.jpg
    94.4 KB · Views: 44
Last edited:
Mart said:
Looking at the photo it's a relatively simple piece and given that it is hidden from view when in use, I'd have a go at making a reasonable facsimile if I needed one.

Edit: I found mine and it is a lot bigger than the photo suggests. I'll post some pics.

Mart.
Click to expand...
584357


584358


584359


584360
 
You must log in or register to reply here.
Back
Top