1935 horn wiring

J

jdjj

Member
Does the horn only have one wire and to which terminal does it go? The one with the white dot or other one? I assume there is no ground wire since its grounded when horn button pushed? The bolt that holds horn on goes thru fender and has the rubber head light pad underneath, but does this ground any way since bolt contacts metal underneath fender? I have a 1934 sedan with terminals a little different, but it has a ground wire on one of the terminals. ??
 
Here are two images. One shows the 2 terminals on the horn and the correct wires that goes into them. The second shows the correct horn wire harness with the yellow wire and the blue wire with yellow tracer
 

Attachments

  • Horn wire clips small.jpg
    Horn wire clips small.jpg
    24.9 KB · Views: 122
  • 20140814_225321.jpg
    20140814_225321.jpg
    28.8 KB · Views: 113
tks petehoovie for the pic it's just like mine i was going to wire it to the two screws since i didnt have original wiring. Do you see any issues with that? Also which screw would be hot side? Thanks for your help.
 
I don't see any screws for the wires. This is a Model A horn but the wire hook up the same way.
 

Attachments

  • Horn1a.jpg
    Horn1a.jpg
    49.9 KB · Views: 87
jdjj said:
tks petehoovie for the pic it's just like mine i was going to wire it to the two screws since i didnt have original wiring. Do you see any issues with that? Also which screw would be hot side? Thanks for your help.
Click to expand...

Jdjj the wires slip into the terminals in here. You may need a pointed nose pliers to push them in. I soldered mine into the horns with no bullet end connectors.
 

Attachments

  • IMG_7281.jpg
    IMG_7281.jpg
    26.1 KB · Views: 68
You must log in or register to reply here.
Back
Top