TerryOH Well-known member Jun 13, 2025 #2 With the brake pedal all the way up and against it's rubber stop, slide the switch on it's two loose mounting bolts until the brake lights just go out. Then tighten the bolts. Make sure the pedal return spring is in place.
With the brake pedal all the way up and against it's rubber stop, slide the switch on it's two loose mounting bolts until the brake lights just go out. Then tighten the bolts. Make sure the pedal return spring is in place.
Don Rogers Well-known member Jun 13, 2025 #3 This might help Attachments detail04.jpg 37.1 KB · Views: 45
