Does anyone offer a steel body requiring assembly

Brookville did sell a body in pieces don't know if they still do. A little less money but not cheap. More difficult to assemble correctly than you might think.
 
butch chase said:
Brookville did sell a body in pieces don't know if they still do. A little less money but not cheap. More difficult to assemble correctly than you might think.
Click to expand...

Yes! Unless someone has a jig to build the Sill assembly on and then hold a body, this will be a disaster. Also, there is a large amount of handwork and fitting that needs to be done to each panel.
 
The roadster bodies are all they produce so not much choice. They can be built up on a model A frame but it has to be straight. They don't come with fuel tanks or body blocks & hardware to include rivets. Body wood is another concern.
 
Hello, I bought a repro quarter and door for a 31 roadster, assuming the were Brookville, and they do require a lot of work to reshape the molding areas and fit door .Wood framing isn’t too extensive, mostly tack strips and seat frame.
 

Attachments

  • IMG_1726.jpg
    IMG_1726.jpg
    43.9 KB · Views: 24
  • IMG_1818.jpg
    IMG_1818.jpg
    83.3 KB · Views: 27
ronn said:
buy a together original. cheaper then a brooksville for the basic body.
Click to expand...

100%. Any project adds up much quicker than most people anticipate or realize. Buying an already together car is generally cheaper in the long run though maybe not initially.

Few things kill motivation more than a non-driving basket case project.
 
You must log in or register to reply here.
Back
Top