What do you use for elec. contact cleaner

[corvette8n]

I was troubleshooting my tractor safety switches yesterday and tried cleaning the switches with an old can of CRC contact cleaner. It didn’t seem to do much.
Is there anything newer and better?. I’m sure some of the contacts on my ‘41 could use some cleaning. BTW I found the PTO switch to be sticky and not allowing my tractor to start, I did get to mow.

 

[TerryOH]

LPS #1 dries to a dry lube and cleans electrical contacts.

 

[Merc Cruzer]

I find that this works well for me.

 

[FrankWest]

Lacquer thinner cleans extremely well.

 

[ndnchf]

CRC fast dry contact cleaner works very well for me. But dont expect it to remove oxidation or corrosion from points. You need to dress the points for that. But for oil, grease and dirt, CRC does very well.

 

[Scotty's 52 F3]

Deoxit D5 might work for you. Recommended to me by HAM radio and tube amplifier guys. Not cheap for what you get but it works great for me.

 

[Tim Ayers]

Deoxit D5 might work for you. Recommended to me by HAM radio and tube amplifier guys. Not cheap for what you get but it works great for me.

I came to recommend this. Works really well for cleaning electrical parts.

 

[corvette8n]

Deoxit D5 might work for you. Recommended to me by HAM radio and tube amplifier guys. Not cheap for what you get but it works great for me.

Thanks, I put it on my Amazon with list.