Add Temp Gauge

DFS

Junior Member
Someday I may restore or replace my liquid temp gauge that has lost its red color, until then, any recommendations for a temp sensor and gauge I could add to the spare port on my heads? Still 6V, positive ground. Thank you.
 

Attachments

  • 20240707_094446.jpg
    20240707_094446.jpg
    82.9 KB · Views: 18
Someday I may restore or replace my liquid temp gauge that has lost its red color, until then, any recommendations for a temp sensor and gauge I could add to the spare port on my heads? Still 6V, positive ground. Thank you.

This is on my 53' Merc, still 6 volt pos ground. Just replace the bulbs with 6 volt bulbs. Got them at O'Reilly's.
 

Attachments

  • DSCN0767.jpg
    DSCN0767.jpg
    59 KB · Views: 28
  • DSCN8504.jpg
    DSCN8504.jpg
    85.1 KB · Views: 17
  • DSCN8505.jpg
    DSCN8505.jpg
    82.3 KB · Views: 17
I run a vintage Stewart-Warner mechanical I scored at a swap meet as well as the stock setup. Works great and looks like it has been there for decades. If you run a mechanical you only need to worry about using a 6V bulb for the illumination
 

Attachments

  • 40-temp.jpg
    40-temp.jpg
    26.7 KB · Views: 25
Back
Top