1939 ford brake pedal bushing

[richard crow]

a while ago a member said he bought a substute bushing at home depo any body know what it is he said he got info from dick spedero rest in peace

 

[19Fordy]

If you remove the covering on this, could you use just the bushing.
https://thirdgenauto.com/product/new-1939-ford-brake-clutch-pedal-bracket-sleeve-and-bushings/

Also, does anyone have the internal and external dia. measurements of the OEM bushing.
You could then make one on a lathe.

 

[nickthebandit]

As dick Spadoro (RIP) told me many years ago, look at plumbing drain pipes. I followed his advice and used a chrome plate brass pipe to do the job.

 

[ActionYobbo]

As dick Spadoro (RIP) told me many years ago, look at plumbing drain pipes. I followed his advice and used a chrome plate brass pipe to do the job.

Same here. I got a chromed brass under sink pipe that was close to what I needed then cut it to length drilled the grease hole then slit it longways and slipped it in the peddle to see the overlap to work out how much to remove to get the diameter needed. Removed that material then cleaned up the edges and put it all together and it’s good.

https://www.fordbarn.com/forum/showthread.php?t=329087&highlight=Brake+bushing

 

[nickthebandit]

Where there is a will, there is a way.