heater motor b6a78527b

[the 59er]

trying to get a heater fan motor for my 59 non a/c galaxie there must be one for sale some where
also how do i remove the interior rear view mirror cant pind how to get to the screws

please be patient with me i,m new to classic cars

 

[KULTULZ]

trying to get a heater fan motor for my 59 non a/c galaxie there must be one for sale some where

1959 FORD - NON-AIR?

1956/ FORD - RECIRC FRESH AIR - 1/4in Shaft Dia - B6A 18527-B
1959 FORD - FRESH AIR - 5/16in Shaft Dia - B9A 18527-A

GIGGLE The Correct PN and you should come across one.

 

[the 59er]

what is the correct part number for a 1959 ford galaxie heater fan motor the car does not have a/c will any other year motor fit or is it specific to that year thank you

 

[Abe Lugo]

To removed the rear view mirror you have to remove the trim around it, so the sun visors and the long trim between the mirrro and the sunvisor

 

[paul2748]

IF you can find a parts store that will take the time, they may have a book showing all the available motors with dimensions. Be sure to get one that turns the correct way.


Another possible source is a Tbird parts supplier. They have fan motors which may be the same as a sedan.


Did you check with a suppliers like Dennis Carpemter, Kanter

 

[KULTULZ]

what is the correct part number for a 1959 ford galaxie heater fan motor the car does not have a/c will any other year motor fit or is it specific to that year thank you

It can be one of two depending on the heater style FORD put in the car.

How to ID and the PN's are in my previous post. Most likely you can find either NOS if you SEARCH the PN.

 

[the 59er]

Thank you for your replys i have tried mr carpenter , how do i remove the two grill retaning bolts from under the headlight / ive taken the headlight brow off but theres no access , owm shows nothing about access to the 5 top bolts

 

[KULTULZ]

... how do i remove the two grill retaning bolts from under the headlight / ive taken the headlight brow off but theres no access , owm shows nothing about access to the 5 top bolts

See if the ILL shows large enough to show detail -