1933 1934 Ford Floorboard

[34FordFabricator]

Here are some photos of a original wooden floorboard an its original metal parts. My photos show the original flat head screw with beveled washer, material stapled to the edge, the pedal bumper plate, and the pedal trim plate. Bill Monzo

 

[petehoovie]

Is it that you are going to reproduce this Floorboard assembly as a kit?

 

[34FordFabricator]

No, lots of guy restoring cars found there car with these parts missing. Just want everyone to see parts from a very original car. Bill

 

[Reconnoiter]

Where can the metal insert shown in the far right pic 3rd row down be procured? I need them for my board, all else is correct, just need those two inserts

 

[Steve Staysko]

Where can the metal insert shown in the far right pic 3rd row down be procured? I need them for my board, all else is correct, just need those two inserts

I also need those two inserts for my 34.

 

[DavidG]

The female portion that inserts into the wooden floor board is shown below along with the capped stud that retains the floor mat by being attached to the female insert.


Bill,


Thanks for sharing the photos of your original #1 floorboard.

 

[Elvis100]

Where can we get a set of these?

 

[deuce lover]

Try Southside Obsolete in MN.His info will come up on Google.

 

[JSeery]

Thanks 34FordFabricator, interesting post!

 

[whizzernick]

I make the flat part that holds the rubber petal bumpers . price is $40 includes shipping
Nick 510-889-1933
I NEED CORRECT FLOOR BOARD ????? I have an old (2years ) Mac one ----not good holes are wrong

 

[highbeams]

Only have one with my car, but can photo when weather permits.

 

[TerryOH]

I got the 353109 hardware from Restoration Supply. I question the use of 95522 capped stud for 33-34 rubber mats. My book shows the 353156-S15 for 33-38 floor mat retainers.

 

[CrazyBackyardBuilder]

I NEED CORRECT FLOOR BOARD ????? I have an old (2years ) Mac one ----not good holes are wrong

Wasn't there a guy on here making them a while back ?

 

[beneckart]

Floor mat retainer 353109 hardware from Restoration Supply. Do you know if still available. I can not find in their catalog

 

[OldGold360]

If anybody is interested, within the next month or two I will be making correct wooden floorboards for early Fords on my 3 axis CNC Router. I’m going to start with the mid 30s pickups, followed by the early V8 Fords. I had several sheets of really nice plywood and only planned to do pickups but have been asked if I would do other years and models. If anybody is interested in one, feel free to PM me.

 

[IronFord]

@OldGold360 I'd be very interested in a a Floorboard for my 34 Coupe.

 

[Bored&Stroked]

@OldGold360 - I'd be interested in a floorboard set for a 34 five-window coupe.

 

[OldGold360]

IronFord and Bored&Stroked…

I’ve got the early ‘35+ pickups and ‘32 pass. car floorboards drawn and ready to make some but having trouble finding the necessary info on 33-34 cars. I have not been able to locate an original or factory blueprints so until I can get one or the other, I’m kinda stuck.

 

[DavidG]

Have you tried the Benson Ford Research Center for the '33-'34 V8 floorboard engineering drawing?


To avoid confusion, may I suggest that you mention which of the four different sets of '32 passenger car/sedan delivery boards that you are going to reproduce.

 

[OldGold360]

Have you tried the Benson Ford Research Center for the '33-'34 V8 floorboard engineering drawing?


To avoid confusion, may I suggest that you mention which of the four different sets of '32 passenger car/sedan delivery boards that you are going to reproduce.

Yes, I spent hours trying to find something thru Benson. I do have a ‘34 3 window body but the floors had been altered at some point in its life so using it for specs or even final fit isn’t an option. I would like to make floors for any models that are needed but require accurate information to even start. It seems nobody is making floorboards most the Early V8 Fords.