21 stud heads

Lawrie

Lawrie

Well-known member
City
Gladstone
State
Queensland
Wanted, cast iron 21 stud cylinder head part number 68-6050B.
Thanks Lawrie
 
Last edited:
i have a pr of used heads, no visable cracks, $70.00. the shipping is probably going to be expensive, money back if heads are not useable, these have no # on them, they are 21 stud 1937-early 1938
 
These are both 68-6050 B and have no visible problems other than needing a good cleaning . Your choice $25 + the ride . The one with the water pump has better markings . Both would clean up . I think the land down under iz a good hike from WI so the ride may get ugly . Lemme know . Water pump is not included . David J
 

Attachments

  • IMG_2643.jpg
    IMG_2643.jpg
    85.9 KB · Views: 18
  • IMG_2642.jpg
    IMG_2642.jpg
    94.6 KB · Views: 16
  • IMG_2644.jpg
    IMG_2644.jpg
    70.4 KB · Views: 17
  • IMG_2645.jpg
    IMG_2645.jpg
    88 KB · Views: 17
Are these head to fit the 37-38 eng,I need the ones to fit a 36 with the water pumps in the head.
Let me know .Thanks Lawrie
 
I have no idea what you're looking at as the heads I sent pics of CLEARLY are waterpump type . 37-38 heads have the water outlet in the top center and are 78- part # .
Lawrie said:
Are these head to fit the 37-38 eng,I need the ones to fit a 36 with the water pumps in the head.
Let me know .Thanks Lawrie
Click to expand...
 
Finishing my last post ; All 68- heads have waterpumps . 37-38 21 stud heads have the water outlets top center pointing up as installed . They are 78- heads . HD has this type . If you were responding to his post as first - sorry bout buttin in . I just assumed by your request for 68- type those wouldn't work . Anyway both heads in pics are gennie ford and clearly marked . Both were on decent motors that had aluminum heads put back on . Gasket surface is pretty good on one and nice on the other . These are pretty common unless you're trying to match two as the variants of these are numerous . Both markings , castings & combustion chambers can be quite different . The heads in pics are both what i refer to as " old type " . There's plenty others on here that know WAAAY more bout 68- stuff so izza gonna shaddup . I hate rude people so i try not to be one but we slips sometimes :D David J
Lawrie said:
Are these head to fit the 37-38 eng,I need the ones to fit a 36 with the water pumps in the head.
Let me know .Thanks Lawrie
Click to expand...
 
David, I was refereing to the heads HD had, I thought they were not the right ones. I will be in Bonneville in August, is Wi any where near there,
How much do you want for the heads.
Thanks Lawrie
 
Bonneville is in Utah on I-80 just west of Salt Lake City . WI is not near there . I was under the impression you just needed one ? I have pairs also but the two in pics are loose . As stated your choice $ 25 + shipping . Both look good enough to clean and put on . Do you know someone here that will be at Bonneville when you are there ? I could ship it to them . Or I could ship it directly to you . I've sent stuff down under B-4 . Look at your head to see if it matches . .
Lawrie said:
David, I was refereing to the heads HD had, I thought they were not the right ones. I will be in Bonneville in August, is Wi any where near there,
How much do you want for the heads.
Thanks Lawrie
Click to expand...
 
You must log in or register to reply here.
Back
Top