3049 Remflex exhaust manifold gasket set

1948F-1Pickup

1948F-1Pickup

Well-known member
Had them on the truck for about a year and a half. One of them was leaking and despite being torqued like all the others, it has pretty much completely failed. Sent an email to them but nothing. Crickets basically.
I’ll have to give them a call, but come on….. really? It’s not like I’m trying to communicate via text message. Not too pleased to say the least.
 
Remflex Exhaust Gaskets Exhaust Gasket Ford V8 L Head 221/239 39-53 : 3049

F143891443.jpg
 
Do you have stock exhaust manifolds? If not, it could be that the exhaust flange faces are not in the same plane. Lay the header on a flat surface and make sure they're all in contact. File, grind or double up a gasket to compensate. I like FelPro gaskets.

Glenn
 
glennpm said:
Do you have stock exhaust manifolds? If not, it could be that the exhaust flange faces are not in the same plane. Lay the header on a flat surface and make sure they're all in contact. File, grind or double up a gasket to compensate. I like FelPro gaskets.

Glenn
Click to expand...

They're factory cast iron exhaust manifolds. I'm re-doing the exhaust
from the manifolds to the back right now because the new mufflers I had weren't pleasing me and the tubing & routing was pretty unprofessional.

Manifolds are ceramic thermal coated in black and since they weren't leaking when I got the truck I'm thinking they shouldn't be now. I have the one offending port set up with a new gasket and a liberally thick coat of high temp silicone. We'll see how that goes. I generally don't use silicone on exhaust ports as it's not a good practice.

I'm still mainly bothered by Remflex's lack of return contact.....
 

Attachments

  • IMG_4658.jpg
    IMG_4658.jpg
    33.2 KB · Views: 110
  • IMG_4656.jpg
    IMG_4656.jpg
    63.6 KB · Views: 109
  • IMG_4161 (Medium).jpg
    IMG_4161 (Medium).jpg
    65.2 KB · Views: 105
  • IMG_4163 (Medium).jpg
    IMG_4163 (Medium).jpg
    110.4 KB · Views: 107
  • fabricated OE hangar.jpg
    fabricated OE hangar.jpg
    44.5 KB · Views: 108
1948F-1Pickup said:
They're factory cast iron exhaust manifolds. I'm re-doing the exhaust
from the manifolds to the back right now because the new mufflers I had weren't pleasing me and the tubing & routing was pretty unprofessional.

Manifolds are ceramic thermal coated in black and since they weren't leaking when I got the truck I'm thinking they shouldn't be now. I have the one offending port set up with a new gasket and a liberally thick coat of high temp silicone. We'll see how that goes. I generally don't use silicone on exhaust ports as it's not a good practice.

I'm still mainly bothered by Remflex's lack of return contact.....
Click to expand...
534752


534753


534754


534755


534756
 
In my 55+ years of working on autos it is very rare gaskets fail without help. eg. loose bolts. Uneven surfaces. Mismatched surfaces. Lack of surface area. Excessive exhaust system movement to list a few.
Did gasket leak between manifold and block or manifold and exhaust.
If block to manifold after cleaning both apply a very thin coat of grease to manifold and then bolt to block without gasket torque as normal and then remove. Now look at block mating surface to see grease mark contact area. This could show a potential issue. If it’s manifold to exhaust you can pretty much take it to th bank it’s not the gasket.
I n the world we live in today I’m not surprised the company has not responded. The profit on the gaskets i feel couldn’t support such service unfortunately. And what can they tell you without seeing your vehicle to gather all the facts.
Good luck.
 
1948F-1Pickup said:
I doubt it’s that far off in thickness. Got the new ones stuck on their with high temp gasket sealant though…..
Click to expand...

I’ve been selling Remflex gaskets since they were first introduced. You do not want to use gasket sealant with them and don’t over torque them. Remflex gaskets the gasket is designed to go on dry
 
Well then, the rear left side port on the driver's side is going to leak forever...
Perfectly torqued initially. Leaked like a sieve. Didn't leak with that same cast iron manifold before the engine was rebuilt.

I'll take my chances with the sealant on both sides of the gasket on that port.
 
KiWinUS said:
In my 55+ years of working on autos it is very rare gaskets fail without help. eg. loose bolts. Uneven surfaces. Mismatched surfaces. Lack of surface area. Excessive exhaust system movement to list a few.
Did gasket leak between manifold and block or manifold and exhaust.
If block to manifold after cleaning both apply a very thin coat of grease to manifold and then bolt to block without gasket torque as normal and then remove. Now look at block mating surface to see grease mark contact area. This could show a potential issue. If it’s manifold to exhaust you can pretty much take it to th bank it’s not the gasket.
I n the world we live in today I’m not surprised the company has not responded. The profit on the gaskets i feel couldn’t support such service unfortunately. And what can they tell you without seeing your vehicle to gather all the facts.
Good luck.
Click to expand...

The facts are that I'm posting to tell of my experience with the product and
my experience with remflex NOT getting back to me. That's pretty much the
situation.
Not a debate about whether I know what I'm doing after 42 years of wrenching or my 27 years in the automotive aftermarket dealing with customer service issues such as this one. I didn't operate that way and
don't expect companies to operate that way.....
 
1948F-1Pickup said:
The facts are that I'm posting to tell of my experience with the product and
my experience with remflex NOT getting back to me. That's pretty much the
situation.
Not a debate about whether I know what I'm doing after 42 years of wrenching or my 27 years in the automotive aftermarket dealing with customer service issues such as this one. I didn't operate that way and
don't expect companies to operate that way.....
Click to expand...

That’s fantastic.
Cheers mate.
 
You must log in or register to reply here.
Back
Top