Russian distributor

F

fried okra

Senior Member
I have a distributor that has been labeled with a piece of tape as "Russian distributor".

It has the condenser in the original lower body of the unit (not on top plate) and looks similar or identical to me as a standard Ford USA dizzy.

Does any one know or have a guess as to any differences with the Russian labeled one I've got and whether it is a direct replacement to use as a spare?
 
Maybe a GAZ.
 

Attachments

  • 1920px-Engine_of_a_GAZ-67B.jpg
    1920px-Engine_of_a_GAZ-67B.jpg
    54.7 KB · Views: 185
If one google's "GAZ distributor" and filters off all the "gas distributor" listings (just google trying to be "helpful"), one comes to MANY GAZ Russian automobile distributors.

There seems to be an active auto parts trade in this. Much like the US with Mallory and all the others.

As I'm not that familiar with the product line of Pre-War Russia, perhaps someone could look through the results and pick out the variant that is of interest?

Here is one...

https://en.avtoclassika.com/car/gaz-21/483/170347/

Joe K
 
The distributor that i have with a piece of tape with Russian written on it looks exactly like the two other US Model A distributors I have......circa 1931 or 1932 maybe if it is indeed a Russian distributor.
 
fried okra said:
The distributor that i have with a piece of tape with Russian written on it looks exactly like the two other US Model A distributors I have......circa 1931 or 1932 maybe if it is indeed a Russian distributor.
Click to expand...

There are those who have studied the "factory markings" of various Model A parts. Likely including the distributor.

Steve Plucker comes to mind. Steve has forgotten more about the Model A than I likely ever knew - and he's been gracious enough to "leave his trail of bread crumbs" for the rest of us to follow. Check out his Index to articles in the various magazines which address the distributor. Its a pretty general list. The Distributor stuff begins on page 72.

If you find an article that might be of interest and don't seem to have access to it - try "googling" the title - you may find it out there in "uncontrolled-land" on the Internet.

http://www.plucks329s.org/pdf/parts/PartsandArticlesonOriginality.pdf

Joe K
 
If it is an original Russian cast GAZ-A/AA distributor body, then it should be a direct replacement / clone for the US made one, just the Russian castings are typically a little more crude/rough.

For comparison, here is a photo of the Russian GAZ-A/AA distributor page from a GAZ-A/AA parts book:
533745


....and from a Russian GAZ-A/AA service manual:
533747


....and from a different Russian GAZ-A/AA service manual:
533746


So, yeah, you should be able to drop it in your US Ford Model A engine and it should work just like the US made distributor body.

Brad in Maryland
 

Attachments

  • IMG_4354.jpg
    IMG_4354.jpg
    76 KB · Views: 289
  • IMG_4348.jpg
    IMG_4348.jpg
    50.6 KB · Views: 287
  • IMG_4352.jpg
    IMG_4352.jpg
    42.3 KB · Views: 289
Benson said:
Post #6:

Very unlikely that this store exists anymore!

Really a sad deal!
Click to expand...

Yes, I pulled this up as "example" of the trade - not expecting the trade would be "past trade."

And not to let this thread go "political." Life is still pretty nice for some in Ukraine.

One expects as the Russian GAZ "matured" - they found "improvements" to be made along the way - just as Henry would have if he didn't have to deal with marketplace acceptance.

The Model T was where Henry wanted to be - top of the heap and put there by volume production and outpricing his competition. Either by controlling his supply lines, or his output, or attempting to control his market. "Style" to Henry was just a business overhead.

The "flivver" jokes were free publicity to Henry. Until they weren't.

Joe K
 
Benson said:
Post #6:

Very unlikely that this store exists anymore!

Really a sad deal!
Click to expand...


They are still open for business (just to the north of Kiev) and are thankful for the support of the US and other NATO countries (without who's support they would most likely be closed.)

They also have a Germany based partner company who are, of course, also open for business: https://www.sowjetautos.de

....unfortunately neither one sells GAZ-A/AA distributor parts. But no worries, the US Ford Model A distributor parts should fit the GAZ-A distributor with no issues. The original GAZ-A/AA parts were made from the Ford blue prints sent by Ford to Russia.

Brad in Maryland
 
I personally would like to know more about the GAZ-21 distributor with vacuum advance (retard) as pictured above. Or at the least a US equivalent.
 
You must log in or register to reply here.
Back
Top