1956 Mercury turn signal indicator bulb

Abchoppers

Abchoppers

Member
So with the help of this forum and the HAMB, I’m down to some little things on my 56 Mercury. The only thing that doesn’t work as far as lights is the right side turn signal indicator. I believe it’s just a bulb since I hear the relay, and left side green arrow indicator lights up nice and bright. I’ve looked at the gauge cluster and it’s not very obvious to me on how to remove and get to the bulb, if I have to remove it at all? Anyone have any experience with this?
Thanks all,
Ryan
 
Most sockets for dash bulbs on cars of this era just pull out. Make sure the socket is pushed all the way in as this is the ground. Vaguely familiar with the 56 Merc dash, it's gotta be a ***** getting up in there to get the socket.
 
paul2748 said:
Most sockets for dash bulbs on cars of this era just pull out. Make sure the socket is pushed all the way in as this is the ground. Vaguely familiar with the 56 Merc dash, it's gotta be a ***** getting up in there to get the socket.
Click to expand...

You were right, just reached my hand way up through the wires and twisted the socket out, off to get a new bulb. It’s amazing how easy some things are when you get help from someone who knows!
Thank you,
Ryan
 
You must log in or register to reply here.
Back
Top