1938 Deluxe Spare Wheel Clamp Device.

Phil Gillespie

Well-known member
Have just aquired a 38 Deluxe Coupe and lloking for info or pics on securing device for spare wheel.
The spare wheel sits horizontal at aft end of trunk. There is a small right angled pivot piece which obviously requires more bits to secure spare wheel. This is new to me and dont have any idea what I need.
Appreciate any help with this one.
Phil NZ
 

Attachments

  • Boot & spare picture.jpg
    Boot & spare picture.jpg
    58.2 KB · Views: 175
Last edited:
there is also supposed to be a plywood shelf over the spare..should be2 tabs on the fender well to bolt that side to..on the right side there was a wooden board or sometimes ametal piect to bolt the top to, if tabs on floor the piece would be wood. our 38 dlx coupe has wood
 
Thanks for that info will follow up. But this bracket will require more bits for fitment?
The lock bits above are also part of the puzzle?
Phil NZ


With the wooden shelf in place, the set up will make sense. You are missing the wooden shelf.
 
Have now woken up and checked in the 38/39 Book. It seems the clamping device for the 38 for the deluxe coupe is quite specific for the coupes only.

Thanks always new bits to learn about and here is a great forum to source.
Phil NZ
 
The attached photo is from the EFV8 Club 37 REstoration book. It shows the spare tire hold down lock, bracket, bolt and nut. Hope this helps.
 
Here are several pictures of a very nice un-restored 38 coupe that was at the 2013 Grand National V8 Club Meet at Tahoe.
521116

521117

521118

521119
 

Attachments

  • GEDC1086.jpg
    GEDC1086.jpg
    58 KB · Views: 27
  • GEDC1087.jpg
    GEDC1087.jpg
    62.9 KB · Views: 29
  • GEDC1098.jpg
    GEDC1098.jpg
    42.3 KB · Views: 28
  • GEDC1101.jpg
    GEDC1101.jpg
    77.4 KB · Views: 69
Back
Top