jimvette59
Well-known member
Can the 9" long pressure plate bolt up to the 9 1/2" bolt pattern ?
Pressure Plate ?
- Thread starter jimvette59
- Start date
Kube
Super Moderator
No.
blueoval37
Junior Member
Lou just rebuilt my pressure plate did excellent job
jimvette59
Well-known member
Thanks blueoval 37
jimvette59
Well-known member
I just looked up the spects. for the 9" PP the bolts holes are three sets of two 120 degs.
apart with a 5.187 diameter and two 5 1/16 x 18 threaded holes 2.844 C to C. The 9 1/2" PP bolt holes are 3.000 apart . Just a note a 10" long does not work at all.
apart with a 5.187 diameter and two 5 1/16 x 18 threaded holes 2.844 C to C. The 9 1/2" PP bolt holes are 3.000 apart . Just a note a 10" long does not work at all.
jimvette59
Well-known member
Thanks Ron. I will do that. I was just looking for a quick answer after drilling for a 10 long that does not work. Please see my last post Well back to the drawing board.
Not putting down The HAMB but i got so many stupid remarks i got so mixed up I ordered a 10 long.