Painless wiring kits

K

KJ714

Member
If you were going to get a wiring kit for a pretty typical 1935 - 1940 coupe 12v build, no power windows, but a heater, maybe a classic auto AC, electric fuel pump, which kit would you get? Any options better than Painless?
 
Rebel 9+3 kit. I've used them for my '39 p/u and my '54 Ranch Wagon. Had help by my old boss on the '39. Piece of cake. Unfortunately he passed so I was on my own for the Wagon. Only needed to call Rebel Tech support a couple of times (wiring isn't my thing) and all was well. Rebel kits are USA made and their tech support is great. They explain everything and don't make you feel like an idiot. You won't be disappointed with Rebel. IMO. And if your an Alliance member on the HAMB Rebel offers a discount to Alliance members.
Rebel Wire .:. Wire Kits for Real Rods
 
I have used EZ wire, Kwik Wire, American Auto Wire, and Painless. My good friend has used Rebel Wire. EZ is probably the cheapest, but made overseas. All the others are made in the US. Painless is probably the most expensive. I prefer Kwik Wire and American Auto wire. The Rebel Wire looks like a quality product, but I have not used it. For what you want to do a 12 fuse panel will be just right for your project.
 
I've used a few of the American Autowire highway kits and like the stand alone fuse block. You only connect the wires needed and don't have a big bundle of unused wire hanging from it.

I have seen other kits that have this feature but don't remember brands.

I'm shocked at where the prices for wiring has gone!
 
My choice has been Ron Francis with my '32 and '40. Quality panel and wiring, super tech support when needed, and very good variety of switches, lights and accessories.
 
I've used American Autowire panels on a few cars, as mentioned above you only hook up what you need. There are no leftovers hardwired into your fuse block. The cleanest option is to do your own wiring. These cars are so simple you can do it yourself. I'd suggest an Enos "Blackbox" panel https://www.racersrods.com/ (they now offer a smaller 11 fuse version, too) and cloth wiring from Rhode Island Wiring. Both quality suppliers.
 
Detonator said:
I've used American Autowire panels on a few cars, as mentioned above you only hook up what you need. There are no leftovers hardwired into your fuse block. The cleanest option is to do your own wiring. These cars are so simple you can do it yourself. I'd suggest an Enos "Blackbox" panel https://www.racersrods.com/ (they now offer a smaller 11 fuse version, too) and cloth wiring from Rhode Island Wiring. Both quality suppliers.
Click to expand...
Interesting as I used the Enos kit on a couple of cars when they first came out. They were a quality unit and easy to wire. I'm assuming that Dennis Enos sold the business to these guys in Idaho?
 
I have used Painless and Ron Francis in several of my builds, both vendors have excellent products.
One of my most difficult projects was a 64 Chevy C10 to which
we blended a '98 Chevy Z71 chassis, 5.7 Vortec V8, 4L60 trans, 10 bolt 342 rear end. 5.7 is fuel injected which is controlled by a factory ECU, that also controls the trans.
We used a 21 circuit Painless harness for the vehicle chassis to manage all of the various components.
The only problem we had was getting the ECU re-programed to eliminate the systems we did not need, like anti-theft, navigation, and a lot of emission nonsense.
 
On the topic of wiring, I remember a thread where a lot of people recommended a specific book for wiring basics but I cannot find it now. Any recommendations?
 
TJ said:
Interesting as I used the Enos kit on a couple of cars when they first came out. They were a quality unit and easy to wire. I'm assuming that Dennis Enos sold the business to these guys in Idaho?
Click to expand...


Yes, he did, and the new owner has been just as great to work with. His new, smaller panel is ideal for us guys that don't run power windows, A/C, etc etc
 
Chris L said:
On the topic of wiring, I remember a thread where a lot of people recommended a specific book for wiring basics but I cannot find it now. Any recommendations?
Click to expand...


"How to Wire Your Street Rod -- From Start to Finish"



it's been around forever, and available from most shops
 
You must log in or register to reply here.
Back
Top