Distributor outer cap gaskets on dome distributors

"Praise God from whom all blessings flow". I have the gasket installed correctly on one side of the distributor. I had to pull the wiring loom to get to it. On the little 60HP, that is a tough job with crooked fingers. I'll get the other side done, whenever. I'll try to get some pictures posted soon. (With somebody's help. LOL.)
 
Last edited:
Lawson, there are many of us here more than willing to help you post pictures. Just let us know when you are ready
 
Lawson, Here is what we did two years ago on my '34 Ford distributor. We couldn't get it all together with the wire looms attached so we pulled the wires out of them. The way we got the wires back into the looms was to attach baling wire to the sparkplug ends of each wire and flood the insides of the looms and all of the wires with silicone lubricant. Then we pulled the wires trough the looms, shortest ones first. I hope that this helps you.

Robert
 
Robert/Texas said:
Lawson, Here is what we did two years ago on my '34 Ford distributor. We couldn't get it all together with the wire looms attached so we pulled the wires out of them. The way we got the wires back into the looms was to attach baling wire to the sparkplug ends of each wire and flood the insides of the looms and all of the wires with silicone lubricant. Then we pulled the wires trough the looms, shortest ones first. I hope that this helps you.

Robert
Click to expand...

Thanks Robert, but that part is already done.
 
You must log in or register to reply here.
Back
Top