Pilot “Bearing” Or “Bushing” Which Do You Prefer?

piewagn

piewagn

Junior Member
Pilot “Bearing” Or “Bushing” Which Do You Prefer?

Was just wondering which you guys prefer, the clutch pilot bearing, or the bronze pilot bushing?
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

I use the bearings with the 2 rubber seals. Dirt cheap. I bought a lot of 10 last time. Always good to have one on hand.

6203-2rs is the generic name. 40mm OD 17mm bore 12mm width.

Mart.
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

I used bushing, good enuf for Henry, good enuf for me
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

I've always used the bushing, never had any problems.
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

Anyone have a modern part # for either the bearing or bushing?? I’m at that point now and need one. This is for an 8ba.
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

Very common bearing, used in starters, generators, motorcycle front axle, washing machine motors, etc. 6203 is the bearing size. the suffex letters indicate the shield design.
The whole world used metric sizes and did not know it.
Bruce
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

Correction, I need the pilot bearing to fit the flywheel with a T-5 transmission.
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

I've sold a large number of T5 conversion kits all with bronze pilot bushings. Failures have been minimal. Usually an installation problem.
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

I use both depending on what I have in the drawer at any given time.
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

I prefer using a ball bearing as the pilot. I was fortunate enough to work for a company that used millions of ball bearings in manufacturing their products, so I was able to stock up on the best ball bearings made that will work as that EFV8 pilot bearing. I made a post here on this subject years ago that is hopefully still in the archives with all the pictures still available. I don't have time at the moment to search for it, but I know others here are good at doing that.
 
Last edited:
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

How about a bushing/bearing combo for a T5.
 

Attachments

  • clutch pilot.JPG
    clutch pilot.JPG
    27.2 KB · Views: 20
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

Ken/Alabama said:
Anyone have a modern part # for either the bearing or bushing?? I’m at that point now and need one. This is for an 8ba.
Click to expand...

Hey Ken! The bearings I’ve ordered are the 6203-2RS as Mart stated above. I ordered a few because they’re very inexpensive…
 
Re: Pilot “Bearing” Or “Bushing” Which Do You Prefer?

It seems like an evenly mixed bag. There’s a bronze bushing in mine now, but I did order a few of the 6203-2rs… we’ll see when I get to that point. I’ll measure it and see how worn it is compared to input shaft size….
 
You must log in or register to reply here.
Back
Top