fredeuce
Member
As the title to this thread suggests I am working on an Australian delivered 54 Ford Customline steering box. The model in Australia is a carry over from '53 in that they still ran a flathead engine and also ran the king pin front suspension.
This steering box suits such a model.The box has "Ingersol" cast into the housing.
I have dismantled the box and inspected it . It is in good order and so simply needs a seal. All of the seals described in the MACs catalogue and Dennis Carpenters describe either a 1.0625" dia. sector shaft or a 1.25" dia. sector shaft.
My unit measures 1.125" . The seal measures in at 1.550" OD.
Can anyone comment on this seal and its availability from these suppliers?
This steering box suits such a model.The box has "Ingersol" cast into the housing.
I have dismantled the box and inspected it . It is in good order and so simply needs a seal. All of the seals described in the MACs catalogue and Dennis Carpenters describe either a 1.0625" dia. sector shaft or a 1.25" dia. sector shaft.
My unit measures 1.125" . The seal measures in at 1.550" OD.
Can anyone comment on this seal and its availability from these suppliers?
